Existing Services Code

EXISTING SERVICES CODE

                  COLUMN 1                                               COLUMN 2                                               ASSESSMENT
            SPECIFIC OUTCOMES                          PROBABLE SOLUTIONS (if code assessable)
Setbacks and easements
O1                                                   S1.1                                                      Can comply
Development near a sewer, water main,                The footing of any structure or building is located       The footings of the building will be located
stormwater drain, overland flow path or associated   clear of the zone of influence but no closer than 1.5m    appropriately. The development can be
structure does not                                   (measured horizontally) from infrastructure               conditioned appropriately.
a) adversely affect the function of the service;     including sewers, water mains and stormwater
b) place an additional load on the service; and      structures;
c) unduly increase future maintenance costs.         AND

                                                     S1.2                                                      Can comply
                                                     No building or structure overhangs the zone of            The buildings and structures will be designed
                                                     influence;                                                appropriately. The development can be
                                                     AND                                                       conditioned appropriately.

                                                     S1.3                                                      Can comply
                                                     Finished surface levels maintain a minimum of             The development will provide an appropriate level
                                                     600mm of cover, but no greater than 3m of cover           of cover over underground infrastructure.
                                                     to the underground infrastructure;
                                                     AND

                                                     S1.4                                                      Can comply
                                                     If the existing surface level is altered, surface level   The development will be alter manholes and
                                                     services including manholes and inspection points         inspection points, as required.
                                                     are altered to match the new surface level;
                                                     AND

                                                     S1.5                                                      Can comply
                                                     Alterations are constructed in accordance with            Any alterations will be completed in accordance
                                                     Sections 3, 4 and 5 of PSP6 Engineering Design            with Council requirements.
                                                     Standards Water and Sewerage and Section 4 of
                                                     PSP5 Engineering Design Standards Roads,
                                                     Drainage and Earthworks;
                                                     OR




                                                                                                                                    Existing Services Code     Page 1