Skip to the record
Trusted by locals. Built for Noosa.

Original source · versioned page text

UPDATED DA - Attachment 10 Stormwater Management Plan

of 17

Page text read automatically using OCR, there may be inaccuracies

Plans and drawings: the text below has words only, no drawings.

Log in to see the plans as drawn
                                     STORMWATER MANAGEMENT PLAN

Client: Noosa Shire Council                                                                       Location: Doonan


4.0     STORMWATER QUANTITY
Stormwater quantity management for the site ensures a “no-actionable nuisance” design for the proposed
development. Development of the site will result in an increase in impervious area and a corresponding
increase in peak stormwater runoff. However, as the proposed development area (2.24 ha) is much smaller
than the overall catchment (287 ha) the minor increase in the fraction impervious has a negligible effect on
the overall catchment peak discharges. As the proposed development has a fraction impervious higher than
the overall catchment and is located closer to the downstream boundary (outlet) the peak discharge will
arrive at the outlet much sooner than the overall catchment. Therefore, the increase in the peak discharge
for the overall catchment will be negligible. Further, stormwater detention is not required for the proposed
development.

Refer to Figure 4-1 for the overall stormwater catchment. Refer to the Flood Impact Assessment (Report No.
M25-0045Rpt Issue A) prepared by Covey Engineers for further details.




                  Figure 4-1 Overall Stormwater Catchment (extract from report no. M25-0045Rpt)




                                                   6                                        Project No: 244035
                                                                                           M25-0042 Rpt Issue A
Log in to download the original file

UPDATED DA - Attachment 10 Stormwater Management Plan.pdf · 7.1 MB (large file)

The download may take up to a minute.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.