Composting toilet manual

      Step 6: Installing the Compost Chamber

  •     (A brush seal is supplied for the ‘In-service’ lid and acts as a seal to prevent any odour
        emitting from the chamber.) Remove the adhesive cover and place the brush seal on the inside
        surface of the lid as shown below.
  •     Add 50mm depth of bulking agent (supplied) to the chamber to create a bed.
  •     Slide the ‘In-service’ compost chamber lid (with Pre-Cut Hole) up onto the waste chute from
        underneath and place the chamber underneath the lid.
  •     Lower the lid onto the chamber.
  •     Rotate the lid to lock the catch plates onto the pins.
  •     Attach the toggle latches as shown below and the chamber is installed.




              Place brush seal on inside surface of
                   chute extrusion as shown.




                      Toggle latch.



IMCM-203.07.09.2020                       © Ecoflo Wastewater Management Pty Ltd                      Page 11