Info response 6 may · MCU21/0212

   18. Provide a preliminary design of the proposed access driveway. The design
       must be prepared by a suitably qualified person (RPEQ - Registered
       Professional Engineer of Queensland) and include but not be limited to:
       a. dimensions, levels and grades,
       b. a longitudinal section extending from the centreline of the road
       formation in Seaview Terrace to the garage floor,
       c. any works required to maintain runoff from the road formation in the
       road reserve, and
       d. detail to demonstrate that vehicles will not scrap or bottom out on the
       driveway or the road formation when entering and exiting the site.

A preliminary design of the driveway, including cross section is provided as part of the
revised plan package detailing appropriate grades to allow for cars to access the site
without major earthworks into the road reserve and/or bottoming out of cars. As the
application is for a dwelling house in the Low Density Residential zone - it is recommended
a condition be imposed for operational works applications to provide detailed design for
all operational works components associated with the Material Change of Use application.




                                                                              Page 2 of 5