Appendix A - Copy of Existing Approval · 132008.1128

                                                                                     132008.1128
55.    Digital detailed designs including drawings, calculations, specifications and a
       schedule of works, shall be submitted with any application for a Development Permit
       for Operational Works in respect of roadworks and stormwater drainage works. The
       design shall be in accordance with Council's Planning Scheme Policy PSP05 -
       Engineering Design Standards - Roads, Drainage and Earthworks. To avoid conflict
       with underground pipes or services, all existing and proposed services required by the
       development shall be shown on the plans.
56.    To facilitate production of As Constructed drawings it is suggested that all design
       drawings are submitted in the Asset Design and As Constructed (ADAC) digital
       format. (Guidelines on the use of ADAC are available at www.adac.com.au).
57.    A construction management plan/strategy to ensure no damage occurs to Council
       services shall be prepared by a suitably qualified Registered Professional Engineer
       and submitted to Council in conjunction with any application for Operational Works.
58.    Any damage caused to any public utility during the course of construction shall be
       repaired to Council's standards and at no cost to Council.
59.    Any alteration of any public utility or other facilities necessitated by the development of
       the land or associated construction works external to the site shall be at no cost to
       Council.
60.    The transportation of all materials to and from the site shall be undertaken in a
       manner such that no particle matter escapes onto a public road. All vehicles carrying
       materials either to or from the site shall be covered to prevent materials including dust
       being windblown from the vehicle.
61.    As Constructed drawings and data shall be certified by a qualified experienced Civil
       Engineer for design intent, and a Licensed Surveyor shall certify the cadastre and the
       location, level and type of all services and structures. All of which shall be submitted
       to Council for checking and for Council's records.
       The data must fully detail levels for all engineering works including but not limited to
       drainage structures, finished ground levels and pavement surface levels. The data
       shall be submitted in the Asset Design and As Constructed (ADAC) digital format.
       (Guidelines on the use of ADAC are available at www.adac.com.au).
       Approval of works shall not be granted until all As Constructed information has been
       supplied and accepted by Council.

HYDRAULICS & WATER QUALITY

Stormwater Drainage
62.    The site must be provided with a stormwater drainage system connecting to a lawful
       point of discharge. The works must be undertaken in accordance with an Operational
       Works approval and designed in accordance with the requirements if the Queensland
       Urban Drainage Manual, and must include in particular the provision of a relief
       overland flowpath from the proposed sag point in the internal street drainage system.
       The development layout is to be amended as necessary to achieve compliance with
       this condition.




PD-DA-FM58/5-02/04/2009                                                        Page 10 of 24