Development Application Part 1 of 2 - IDAS Form 1, Form 28, Checklist, vica versa doc details of attachment 13 Cooran Court Noosa Heads · OPW10/2100

INSTRUCTION MANUAL

Assembly Instructions
Float Assembly Sequence

Shoreline

 

 

Exhibit A

» Float corners are marked with dots to correspond to the numbers.

. =1
ee =2
coe =3
eoce =4

» Each number represents the tab height. #1 is the lowest tab and #4 is the highest tab.

> The sliding nut is inserted on the lowest tab. Typically this will be #1 but in instances where 2 or 3 floats are joined it may
be #2 or #3. Itis important to make sure that the tabs are aligned in proper order; otherwise there will be small ridges in your
assembled dock.

> Typically the side with #1 and #4 is aligned on the narrow side or the side oriented towards the shoreline to minimize the
need for spacers when using lug connectors and accessories.

5