Development Application Part 1 of 2 - IDAS Form 1, Form 28, Checklist, vica versa doc details of attachment 13 Cooran Court Noosa Heads · OPW10/2100

Bock

INSTRUCTION MANUAL
Joining Together Two “Six-Packs” of Floats
1. Assemble on flat surface.

2. Asnoted previous in “Float Assembly Basics,” position six-packs so that correct sequence of float comers and lug nuts are
facing each other. (See “Float Assembly Sequence”)

3. Insert a connecting pin through tabs on outside end, joining the two six- packs - do not attach nut to this pin.
4. With that pin as a hinge, slowly swing the six-packs towards each other.

5. As interior lugs on each six-pack come closer to each other, align the tabs in
correct numbered sequence (using 1 - 4 dots on top of floats).

Hinge pin

6. With all interior tabs aligned correctly, insert another connecting pin in the
opposite outside tabs, to hold alignment.

7. When all interior tabs are properly aligned, insert first interior pin through the
combined six-packs tabs. Insertion of pins can be made easier by first dipping
pins into soapy water.

  

8. Tighten up first inserted interior pin before moving on to the next interior pin - this will help align the next set of tabs.

9. When interior pins are inserted and tightened, remove the exterior "hinge pin" and aligning pins.