Council archive · source document
Development Application part 2 Planning Report MCU13/0051
Very large file (109 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.
e)ensure filling or excavation flood modelling is
does not adversely impact available-a minimum
upon other premises by- of 500mm above the
i. causing ponding of modelled flood level;
water on the site or and
nearby land; c)for areas where
ii. increasing flooding, flood modelling is not
which adversely affects available, a minimum
the safety or use of any of 500mm above the
land upstream and highest known flood
downstream; and level;
iii. adversely affecting the
flow of water in any AND
overland flow path. 512.2 Where Council
infrastructure is
available-
a) any drainage (from
buildings and land)
flows to that
infrastructure; and
b) the infrastructure
has the capacity to
accept any additional
loading;
AND
512.3 Car parking and
manoeuvring areas are
constructed at a level
that permits the
parking area to drain
from the site by gravity
means, without the
need for mechanical
pumping; or
512.4 Basements for
residential uses have
flood immunity above
the 0100 where,
alternative means to
mechanical pumping
are used to achieve
such immunity; or
512.5 Basements for
non-residential uses
have flood immunity
above the 0100 that
may be achieved by
means of mechanical
pumping where the
mechanical’feature is
installed with adequate
holding tanks and an
alternative back up
power source.
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Development Application part 2 Planning Report MCU13/0051Related documentApplication case desk ↗
About this file
- File size
- 109 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.