Decision Notice OPW14-0121 388 David Low Way Peregian Beach · OPW14/0121

                                                                               OPW14/0121

      and the existing footpath, kerb line and line markings should be completed and
      submitted to Council prior to any works commencing.

6.    All works must be constructed and work procedure undertaken in accordance with:
      (a)   The approved plans and conditions detailed in this Decision Notice.
      (b)   All relevant Noosa Council Planning Scheme Policies, particularly PSP 5 –
            Engineering Design Standards – Roads, Drainage and Earthworks.
      (c)   Provision of the Work Health and Safety Act and such other legislation as is
            applicable to workplace health and safety.

      Driveway Design and Construction
7.    The driveway crossover must be in compliance with the approved drawings as
      listed in the Approved Plans list of this permit.

8.    The access crossing and driveway shall be designed and constructed to ensure
      pedestrian safety using non-slip materials, to produce an evenly graded surface
      finish, and to be in accordance with the current Australian Standard 1428.1 Design
      for Access & Mobility.

9.    Pavement design for proposed driveway must be undertaken in accordance with
      the relevant standards and be approved and certified by an RPEQ. The ongoing
      maintenance, the structural integrity of, and any public liability associated with the
      driveway and the crossover will remain the responsibility of the property owner.

10.   Any upgrade of the existing kerbs within the road reserve must also include
      upgrading of the existing two pram ramps to be in compliance with the current
      relevant standard drawings.

11.   Upon completion of the works a certificate must be issued by a RPEQ certifying
      that the works have been constructed in accordance with best engineering
      practice, the relevant standards, the approved plans and the conditions of this
      permit.

      Erosion and Sediment Control
12.   Suitable sediment and erosion control measures must be in place prior to works
      commencing.

13.   The applicant must ensure non essential exposure of soil is prevented by
      restricting the extent of clearing and minimising the duration of soil exposure to
      adverse weather conditions and effectively turf or stabilise any cleared area
      without delay and prior to rainfall occurring.

14.   The applicant must ensure sediment does not leave the site or ends into the street
      channel and Council’s drainage system due to surface runoff or on tyres of
      vehicles.

15.   Prior to the completion of the development, all site surfaces must be effectively
      stabilised using methods which have achieved effective short-term stabilisation
      and which will continue to achieve effective stabilisation in the medium to long-
      term. For the purpose of this condition, an effectively stabilised surface is defined
      as one that does not, or is not likely to result in visible evidence of soil loss caused
      by sheet, rill or gully erosion or lead to sedimentation, or lead to water
      contamination.


                                                                                     Page 3 of 7