OPW14/0165.01 Approved Plans

           -
           --

    NOOSA COUNCIL
   APPROVED PLANS
OPW14/0165.01 9 DEC 2014


[OCR of page images]
OVERALL SITE PLAN + SHEET LAYOUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PLANT SCHEDULE

TREES & PALMS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GROUNDCOVERS + CLIMBERS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CODE DESCRIPTION SIZE HGT&SPRD QTY. STKS
CIS ant CISSUS antarctica ITS

CRA ova CRASSULA ovata 200mm|__200x150mm
EVO pil EVOLVULUS pilosus "Sapphire Blue" [140mm|_150x150mm
HIB sca HIBBERTIA scandens 140mm|_ 150mm long
LIREG LIRIOPE "Evergreen Giant" 140mm|_300x300mm
LOM hys LOMANDRA hystrix "Katie Belles" 140mm|_150x150mm
LOM lon LOMANDRA longifolia 140mm|_150x150mm
PAN jas PANDOREA jasminoides 140mm|_200x100mm
PAN LD PANDOREA jasminoides "Lady Di" 140mm|_ 200x100mm
PAR str PARSONSIA straminea ITS 150mm long
SMI aus SMILAX australis TS 150mm long|
THE min THEMEDA "Mingo" 140mm|_50x200mm
ZOY ten ZOYSIA tenuifolia 140mm|_ 150x150 mm

 

 

 

 

DRAWING SCHEDULE

14025 CD-001
14025 CD-002
14025 CD-003
14025 CD-004
14025 CD-005
14025 CD-200

Cover Sheet

Landscape Details

Vegetation Management Plan
Landscape Planting Plan - Sheet 1 of 3
Landscape Planting Plan - Sheet 2 of 3
Landscape Planting Plan - Sheet 3 of 3

MINIMUM | MIN HEIGHT QTY |STKS/| CLPR | CLEAN

CODE BOTANICAL NAME POT SIZE _| AND SPREAD GUYS STEM
BAC cit BACKHOUSIA citriodora 25 ltr 1400x600mm 25mm
BAC myr BACKHOUSIA myrtifolia 26 Itr 1400x600mm 25mm
CUP ana CUPANIOPSIS anacardioides 45 ltr 1700x800mm STKS| 40mm
ELA eum ELAEOCARPUS eumundi 45ltr 1700x800mm STKS/ 40mm
ELA ret ELAEOCARPUS reticulatus 45\tr 1700x800mm STKS| 40mm
MEL qui MELALEUCA quinquenervia 45ltr 1700x800mm STKS/40mm
WOD bif WODYETIA bifurcata 45\tr 2400x800mm GUYS

XAN chr XANTHOSTEMON chrysanthus 45ltr 1700x800mm STKS/40mm
SHRUBS

CODE DESCRIPTION SIZE HGT&SPRD QTY. STKS

ACM min ACMENA smithii minor 200mm|_400 x 250m

ALP cae ALPINIA caerulea 200mm|_250x150mm

BUX mic BUXUS microphlla var. japonica 200mm|_150x100mm

COR rub CORDYLINE rubra 200mm|_200x100mm

CYC rev CYCAS revoluta I300mm|_450x450mm

DOR pal DORYANTHES palmerii 200mm|_350x250mm

TIB jul TIBOUCHINA "Jules" 200mm|_300x200mm

SYZ cas SYZYGIUM "Cascade" 45\tr 1500x600mm

SYZ leu SYZYGIUM luehmannii 45ltr 1500x600mm

SYZ TT SYZYGIUM "Tiny Trev" 200mm|_450x250mm

LEGEND
PLANTING

-— GROUNDCOVERS
Ns SHRUBS
(— \ TREE

| +

Na,

VEGETATION MANAGEMENT

 

 

7 ‘

i \ EXISTING TREE TO
| J | BE RETAINED

3 EXISTING TREE TO
2 BE REMOVED

EXTERNAL WORKS
FENCES

FEN-1 FENCE TYPE 1
—/— _ -Refer to Detail 06 CD-200

 

 

FEN-2 FENCE TYPE 2
ELL - Refer to Architect

 

SOFTSCAPE
ee EDGE TYPE 1

E1 - Refer to Detail 04 CD-200
—¢— CONDUIT

- Irrigation conduit line

GENERAL PLANTING NOTES

1. PLANT QUALITY

All plant stock is to be in accordance with the scheduled nomenclature, well formed,
hardened off nursery stock. They are to be container grown in potting mixture with a
healthy root system and not pot bound. All pots shall be free of weeds and plant stock
is to be free from living insects, pests and disease. All plants are to be fully sun or
shade hardened-off to suit their on-site growing position for a minimum period of 6
weeks.

Ensure sufficient supply of each species shown on the drawings is available to achieve
the required layout and densities, and in the event of supply for replacement stock due
to failure, damage, unhealthy specimens or theft. Prior to plant stock arriving to site, a
nursery inspection including the Landscape Architect and Landscape Contractor is
required. The plant supplier is to ensure all stock (or good selection of stock) is present
during the inspection. It is also recommended that the Landscape Architect is on site to
inspect plant stock and plant set out prior to planting.

2. IMPLEMENTATION

Ensure all planting procedures result in healthy plant species within the prevailing soil,
climatic and management environment of this project. The following minimum is
expected:

- Excavate a hole for each plant twice the diameter of the rootball and 100mm deeper
than the root ball. Break up the base of the hole to a further depth of 100mm and
loosen the sides of the hole.

- Remove the plant from the container with minimum disturbance to the root ball, place
in final position, ensure it is central and plumb. Ensure the root ball is level with the
finished surface of the soil surrounding the hole or bed.

- Ensure correct placement of fertiliser and/or water retention additive as per
manufacturer's specification and requirements.

- Thoroughly water plants immediately after planting and at such times during the
contract period as required. All large stock will require a minimum of 10ltrs of water and
smaller stock 5itrs of water at the time of planting.

- Backfill with topsoil as specified. Lightly tamp and water thoroughly to eliminate any
air pockets. Ensure that topsoil is not placed over the top of the rootball.

Refer to Details 01, 02 & 03 CD-200 as reference.

Collect all empty plant containers daily during planting operations and remove from
site.

Do not vary the plant locations from those specified on the drawings unless otherwise
directed by the Superintendent. Should it be necessary to vary the locations and
spacing for any reason, immediately apply for directions by the Superintendent.

 

3. PLANT ESTABLISHMENT

The Establishment Period commences at the date of Practical Completion of Works.
During the Establishment Period maintain best horticultural practices, as well as
rectifying defects that become apparent in the works under normal use including (but
not limited to) the following items where required: watering, weeding, fertilising, pest
and disease control, mulching, pruning, rubbish removal and keeping the site neat and
tidy.

4, PLANT REPLACEMENT
Replace failed or damaged plants. This does not include vandalised or stolen plant
material - this will be replaced prior to practical completion.

5. SITE SOILS

All soils are to comply with AS 4419 Table 1 (both site topsoil and imported topsoil) and
receive appropriate amelioration if required. All topsoil must be free from noxious
weeds, rocks, roots, rubbish or any other deleterious material.

Place all topsoil in the areas directed and specified. Ensure that the topsoil is spread
and graded evenly to prevent any ponding. Prevent excess compaction by construction
plant. Stripped site topsoil needs to be stored in piles no greater than 2m high x 3m
wide. Topsoil storage piles for storage greater than 4 months should be seeded with a
suitable grass mix. Eradicate weeds using environmentally acceptable methods, such
as anon-residual glyphosate herbicide in any of its registered formulae, at the
manufacturer's recommended maximum rate. Noxious weeds need to be screened out
of the topsoil prior to placement.

Apply Nom. 300mm of topsoil to planted embankment areas.

6. MULCH

All mulch is to be free of deleterious or extraneous matter such as soil, weeds, rocks,
and twigs. The finish level of the mulch is to be level with the finish level of all adjacent
surfaces after settlement allowances of the topsoil and mulch. Ensure all mulch is
placed clear of plant stems to avoid rotting at ground level.

Any mulch to be salvaged from site cleared vegetation shall be tub-ground on site and
set to achieve a finer mulch with no pieces in excess of 100mm. Site mulch to be
separated into two piles. One is clean (above ground material) and the other is dirty
(material from below ground which may contain soil). The dirty mulch can be used for
soil and erosion purposes.

7. IRRIGATION

A irrigation system is to be installed and connected to one set of the rainwater tanks.
The system is to be aD & C based on guidance provided (location of irrigation
controller and conduits shown on landscape and civil drawings). The irrigation system
is to be a sub-surface dripper system.

GENERAL NOTES

1. FALLS

Grade all turf and planting areas evenly in the direction shown.
Ponding is not acceptable.

2. SOIL:

Refer GENERAL PLANTING NOTES - CD-001

3. WEED MANAGEMENT:

Refer WEED REMOVAL NOTES - CD-002

4. PAVEMENTS AND THRESHOLDS:

By Architect and Civil. Refer to Architect and Engineers drawings.

5. PLANTING AREAS:

Refer drawings for locations:

Cultivate existing sub-grade to 150mm depth, place topsoil to a
depth of 300mm, place 'Hoop Pine! mulch 100mm deep. Use any site
mulch on the embankments at the rear of areas of the site. Mound to
promote positive drainage as indicated on detail.

7. PLANTING LAYOUT

Refer to planting plan for typical coded plant layout. Refer to plant
schedule for plant species and codes.

8. TREE PLANTING NOTES:

- All trees shall have a minimum of 1.2 metre clear trunk.

- Tree stocks 45ltr and above to have 2 hardwood stakes as per
detail.

- All tree stock within the landscape works must comply with
NATSPEC guidelines, refer specification.

9. TIMBER EDGES:

Refer to Detail 04 CD-200

10. FENCES:

All fences and footings to be located within private property (where
applicable).

Where new fences are indicated on the drawings, existing fences are
to be demolished, unless otherwise noted.

Temporary fences to be constructed under drip line of existing trees
to enclose and protect the areas of the root zone. Refer plans for
approximate locations. Locations to be confirmed on site.

11. SERVICES:

The location of all underground or overhead services services shown
on these drawings are indicative only. They have been incorporated
at the design or Council approval stage for general information. The
Landscape Contractor shall be responsible for liaising with the Head
Contractor to determine the 'As constructed! location of all water,
sewer, stormwater, electrical, communication or other existing
services before commencing any excavation works.

12. SEDIMENT AND EROSION CONTROL:

Refer Civil Engineers drawings for all sediment and erosion control
measures.

13. ESTABLISHMENT:

All planting works to be inclusive of a twelve (12) week establishment
period.

 

 

APPROVED PLANS
OPW14/0165.01 9 DEC 2014

NOOSA COUNCIL

 

 

Note:
Refer Cover Sheet for legend.

Cc AMENDMENTS FOR OPW 2014-11-07 JC RB
B OPW APPLICATION 2014-04-08 JC GT
A PRELIMINARY 2014-04-04 JC GT

ISSUE AMENDMENT DATE DRWN CHKD.

COPYRIGHT

THE DESIGN ILLUSTRATED IN THESE DOCUMENTS IS THE EXCLUSIVE PROPERTY
OF DILLON FOLKER STEPHENS PTY, LTD, ACN 095 884 129 AND MUST NOT BE
REPRODUCED, OR USED IN WHOLE OR IN PART WITHOUT THE EXPRESSED.
WRITTEN PERMISSION OF DILLON FOLKER STEPHENS.

 

APPROVAL ONLY
NOT FOR CONSTRUCTION

A

DFS GROUP

 

INTEGRITY * EXCELLENCE » SUCCESS

T 07 5443 5566
F 07 5443 9977

[email protected]
dfs.com.au

TOWN PLANNING
LANDSCAPE ARCHITECTURE

LIQUOR LICENSING
ENVIRONMENTAL

CHECKED

LANDSCAPE ARCHITECT

 

TITLE
Cover Sheet

PROJECT

Mazda/Hyundai Showroom
FOR

GP&LP Properties Ltd Pty
AT
148 Eumundi Noosa Road Noosaville

SCALE
1:500 @ A1, 1:1000 @ A3
DRAWING NO.
CD-001

PROJECT NO:

14025