Original source · versioned page text
Landscape Plans
Powdercoated black SHS
Powdercoated black Paling - refer to notes
post with black plastic cap.
aluminium pool panel Post - refer to notes
50
1100ht set between posts Powdercoated black fence
to make 1200mm ht fence panel rail mounted to post
with proprietary mount. CAR PARK SIDE
Secure with black coated Rail - refer to notes
galv. screws. ROAD SIDE
1200
100
50
G.L.
Footings - round top of
footings to shed water. Footings - Round top of
100
FSL footings to shed water.
- Refer to Engineer's drawings.
400
eq.
10mm dia. Gravel
nom.100
Compacted gravel sub
base - 100mm deep
Capping - 100x25mm
1800
300dia. Post
25
max.2400 centres
100
Rail
Fence Type 3 Notes:
1. Posts to be 50x50 SHS. Install black plastic cap into top of post to prevent Paling
eq.
water ingress and cover sharp edges.
2. All screws and fittings to be hot dip galvanised, painted black, suitable for
fixing into aluminium
3. Finishes to be powdercoated colour black to the posts and panels.
100
4. Aluminium fencing panel to be certified pool fence compliant. Standard rails G.L.
and balusters. CFM weld to all joints. To be powder coated finish - colour black.
Attach panels to posts with proprietary fixings.
5. Footings to be no fines low carbon concrete, 20mpa as specified. Footings to ROAD SIDE
be 300mm∅ x 400 deep. End, corner and gate posts to have 800mm deep
footings. Set footing's into natural ground or compacted subgrade. Locate
1000
Paling
10mm dia. gravel layer 100mm deep to base of hole. Carry footing through to
surface and provide a 25mm weathered-off surround. Rail
6. Where located on top of retaining walls coordinate post location and fixing 10mm dia. Gravel
Capping rail over
nom.100
prior to retaining wall fabrication. Where possible post to be incorporated or
secured into retaining wall. Post
CAR PARK SIDE
7. Install posts on all boundary intersections and space posts evenly between.
1 FENCE TYPE 3 350dia. Butt join rails as shown
CD-301 1:20@A1, 1:40@A3 max.2400 centres
1.2m high safety fence
1.8
2 FENCE TYPE 1 Paling fence - butted
CD-301 1:20@A1, 1:40@A3
Fence Type 1 Notes:
1. Palings to be ACQ pressure treated pine 100 X 16mm to
1.8m high timber paling fence AS1604 Hazard 3. Fix palings with 2 (No.) 50mm x 2.5mm screw
shank or ring shank HDG nails to each rail.
Paling - refer to notes 2. Paling locations are to be fixed to rails as above.
Fence Type 2 Notes: 3. Posts to be ACQ treated HWD to AS1604, Hazard 5, refer
Post - refer to notes 80mm gap 1. Palings to be ACQ pressure treated pine 100 X 25mm to Specification. All post to have no heart (50mm from centre of
AS1604 Hazard 3. Fix palings with 2 (No.) 50mm x 2.5mm pith). Aris all edges. All posts to be 100 x 100mm, evenly spaced
Rail - refer to notes 100mm Paling screw shank or ring shank HDG nails to each rail. with a maximum spacing of 2400mm.
Capping 2. Paling locations are to be fixed to rails and sleepers as Corner posts and end posts to have footings to a depth of
above. Overlap of palings are to be fixed to rails as above. 1200mm.
100 80 Space palings 80mm apart along each side of rail and 4. Rails to be ACQ treated Pine to AS 1604, Hazard 3 100 x 50mm
ensure pailings overlap gap on opposite side per detail.
25
as per spec. Butt join rails as shown on alternative posts where
100
Rail
Bottom of paling set 50mm off finished level. Set palings possible. Screw rails to posts with 1(No.) Type 17 100mm Bugle
Bugle headed batten screws
out from post location. Head Batten Screws. Aris all edges.
G.L. Post 3. Posts to be ACQ treated HWD to AS1604, Hazard 5, refer 5. Capping to be ACQ pressure treated pine to AS1604, Hazard 3
eq
Specification. All post to have no heart (50mm from centre 100 x 25mm. Screw capping to rail with 1(No.) Type 17 Bugle
Footings - Round top of of pith). Aris all edges. All posts to be 100 x 100mm, evenly Head Batten Screws @ 600 cts. Arris all edges.
footings to shed water. spaced with a maximum spacing of 2400mm. 6. Fittings are to be hot dipped galvinised for all screws and
100
- Refer to Engineer's drawings. Corner posts and end posts to have footings to a depth of fittings. Coat with a film of grease or a bitumestic product before
Rail 1200mm.
1800
use.
4. Rails to be ACQ treated Pine to AS 1604, Hazard 3 100 x
Capping - 125x25mm 50mm as per spec. Butt join rails as shown on alternative
posts where possible. Screw rails to posts with 1(No.) Type
eq
Post
25
17 100mm Bugle Head Batten Screws. Aris all edges.
100
Rail 5. Capping to be ACQ pressure treated pine to AS1604,
Hazard 3 100 x 25mm. Screw capping to rail with 1(No.)
Type 17 Bugle Head Batten Screws @ 600 cts. Arris all
100
Paling Rail
edges.
150
150
Paling G.L. 6. Fittings are to be hot dipped galvinised for all screws and
fittings. Coat with a film of grease or a bitumestic product
before use.
80 100
Paling 7. All surfaces to be painted. Paint rails and palings prior to
installation to ensure no exposed timber due to shrinkage.
900
Concrete footing
Rail Paint specified in Materials and Finishes Schedule.
-refer to Engineer's
Capping rail over drawings.
50
Fencing contract to provide shop drawings of gates
including hardware and locking mechanism for review and
approval by landscape architect. Gate frame and hardware
Butt join rails as shown
75
450 to be hot dipped galvanized material.
2400 centres
3 FENCE TYPE 2
CD-301 1:20@A1, 1:40@A3
1.8m Good Neighbour
1.8m high good neighbour paling fence
Revision Date Amendment Drawn Checked
CONSTRUCTION DETAILS
APPROVAL ONLY A 10.04.2026 For Approval CS CS
NOT FOR CONSTRUCTION
CD-301 scale as noted
62 LAKE MACDONALD DRIVE, COOROY
JOB NUMBER: 24228 CLIENT NAME: COAST2BAY HOUSING GROUP
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original (Landscape Plans.pdf)
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.