07/0616 - Response to Information Request [As Published] · 132007.616

@ Page2

item 2:

Comment:

Item 3:

Comment:

item 4:

Comment:

item 5:

Comment:

Item 6:

It is understood that this correspondence was discussed with Manager Land Use,
and it was agreed that the proposed basement configuration could be supported.

Please provide information with regard to the use of the vacant areas in the basement
level.

Due to the proximity of the site to the beach, the owner of the site submits the non-car
portion of the basement level will be utilised for the storage of bicycles, scooters,
surfboards, jet-skis, surf-skis etc.

Please provide a roof plan or plans with dimensions so that side boundary setbacks can
clearly be ascertained and to demonstrate compliance with Probable Solution 8 of the
Noosa Heads Locality Code.

The Upper and Lower Floor Proposal Plans submitted to Noosa Council detail the side and
rear boundary setbacks. In this regard, the following setbacks are confirmed:

Rear. Lower Level 7.4 metres
Upper Level 6 metres
Side (north): Lower Level 1.5 metres
Upper Level 4.5 metres (to balcony)
4.5 metres (to building line)
Side (south): — Lower Level 4.4 metres
Upper Level 2.0 metres (to balcony)
4.4 metres (to building line)

A Roof Plan is included as Attachment 1.

Council calculates that site cover is 45%. Please provide amended plans to demonstrate
compliance with Specific Outcome 10 of the Noosa Heads Locality Code and/or an overlay
demonstrating how site cover was calculated.

A sketch plan detailing the area of the proposed development included in the Site Cover
calculation is included as Attachment 1.

Demonstrate how vehicles can access each carspace in a forward gear, reverse out and
exit the site in a forward gear in a total of three movements. The vehicle dimensions, aisle
widths and required manoeuvring areas are to be in accordance with AS/NZS
2890.1:2004, It is noted that the planning report refers to a “vehicle turntable’ whilst no
turntable is indicated on the drawings.

Please confirm that the aisle widths and vehicle manoeuvring paths detailed on the
proposal plans is in accordance with the Australian Standards. Martoo Consulting is able
to correct the reference to a vehicle turntable.

Please indicate on the plans the location, size and type of any trees or services in the
Altunga Heights road reserve in the proximity of the proposed access driveway.