Original source · versioned page text
OPW14/0197 Approved Plans Part 2 (16-39)
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawnPlotted by: Crawford, Suzanne 6/25/2014 4:12 PM
T +61
GARDEN AREA- REFER
TO PLANTING PLANS
100 DEEP ORGANIC MULCH AS SPECIFIED
www.aecom.com
100x100mm CONCRETE CLIENT
EDGE RESTRAINT PLANT AS SPECIFIED - REFER TO
PLANTING PLANS
ADJACENT SURFACE- REFER
TO SURFACE FINISH PLANS
R10
100
300
300
150
150mm CULTIVATED
SUBGRADE
300mm TOPSOIL AS SPECIFIED
150mm CULTIVATED SUBGRADE BEDDING ON COMPACTED
SUBGRADE
UNDISTURBED EARTH
150 DEEP CULTIVATED SUBGRADE AS SPECIFIED
300 DEEP TOPSOIL AS SPECIFIED
PLANTING AREA / TURF INTERFACE - CONCRETE EDGE TYPICAL NATURAL GROUND PLANTING DETAIL TYPICAL DETAIL: BIO-BASIN PLANTING
01 SCALE 1:10
02 SCALE 1:10 03 SCALE 1:10
PLANTING AS SPECIFIED
-
-
45 x 45 x 600 TREATED PINE
STAKES AT 1500 CENTRES.
NOOSA COUNCIL
PLACE CLOSER TOGETHER
ON TIGHT RADII. APPROVED PLANS NORTH POINT / SCALE
OPW14/0197 3 OCT 2014
N
TIMBER EDGE, SIZE AS
SPECIFIED. NAIL FIXED TO
STAKES.
45 x 75mm TREATED PINE EDGE WITH 45x45x600mm
0 200 400 600 800 1.0 1.2 1.4 1.6 1.8 2.0m
LONG TREATED PINE STAKES LOCATED AT MAXIMUM
1500 CCS. PLACE ADDITIONAL STAKES ON CURVED
CORNERS TO MAINTAIN EVEN CURVE, AS SPECIFIED JOIN TIMBER EDGE WITH 75 1:20 (Original Sheet Size: A1)
TURF AS SPECIFIED x 15 x 450mm LONG SWD
Verify all dimensions on site prior to construction. Do not scale from drawing.
JOINER GALVANISED NAIL All dimensions in millimetres unless otherwise stated.
MULCH AS SPECIFIED
FIXED TO EDGING
TURF AS SPECIFIED
75 x 15 x 450 JOINER TIMBER PLANTING AREAS AS TURF AREA AS SPECIFIED TOP SOIL AND FERTILISER AS
NAIL FIXED TO EDGE SPECIFIED SPECIFIED
TIMBER. JOINER TIMBER TO
BE FINISHED 15mm BELOW
TOP OF EDGE TIMBER.
100
150
OP3 RFI RESPONSE 25.06.14 JL
OP2 OPERATIONAL WORKS 23.04.14 WW
OP1 OPERATIONAL WORKS 17.03.14 JL
ISSUE DESCRIPTION DATE CHECK
SAW CUT AT REGULAR
INTERVALS TO OUTSIDE
CURVE OF TIMBER EDGE TO
ACHIEVE TIGHT RADII. SC SC WW 25.06.14
CULTIVATED SUBGRADE AS DESIGN DRAWN CHECK DATE
SPECIFIED
CAD Ref: P:\Projects\60314304\5. CADD\5.3 Working\5.3.1Sheets\Stage C\L-4304-STAGE C-902
PROJECT NUMBER
INDICATIVE EXISTING
GROUND LEVEL
6031 4304.01
PROJECT
DOONELLA
TIMBER EDGE TYPE 1 - TYPICAL PLAN TIMBER EDGE TYPE 1 - TYPCAL SECTION TURF - TYPICAL SECTION STAGE C
04 SCALE 1:10 05 SCALE 1:10 06 SCALE 1:10 DRAWING TITLE
DETAILS
STATUS DRAWING ISSUE
OP3 L-4304-STAGE C-902 OP3
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.