Original source · versioned page text
OPW14/0197 Approved Plans Part 2 (16-39)
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawnPlotted by: Crawford, Suzanne 6/25/2014 4:12 PM
HDG ANGLE BRACKET 100mm X 100mm X 75mm X 4mm
FIXED TO TIMBER TOP RAIL AND POSTS WITH M12 BOLTS T +61
100mm X 100mm H4 TREATED HARDWOOD TOP RAIL 10mm
ARRIS TO TOP SIDE REFER SPECIFICATION FOR FINISH
VARIES www.aecom.com
PROPERTY BOUNDARY
RHS 38mm x 25mm x 2.0mm HDG STEEL GATE FRAME. CLIENT
PROPERTY BOUNDARY
ALL JOINTS CFW. GATE TO CENTRE OF ADJOINING PATH.
PROPERTY BOUNDARY
GALVANISED FENCING WIRE @ 100mm X 100mm H4 TREATED HARDWOOD
GALVANISED FENCING WIRE @ 250MM CCS. 250MM CCS. REFER SPECIFICATION TOP RAIL. 4 NO. BATTEN SCREWS TO GATE
REFER SPECIFICATION FOR TYPE FRAME. 10mm ARRIS TO TOP SIDE EDGES
INDICATIVE CONCRETE FOOTING
100mm X 100mm H4 TREATED HARDWOOD
POST 10mm ARRIS TO VERTICAL EDGES
3 NO. HDG HINGES WELDED TO GATE FRAME
& COACH SCREWED TO TIMBER POST
HEAVY DUTY HGV 500mm DROP
BOLT WELDED TO GATE FRAME
MAX 2500
MIN 1150
1500 1500
POST SPACING VARIES BETWEEN THESE
DIMENSIONS. MIN. 2 SECTIONS AT 1150mm SPACING. VARIES ACCESS PATH
16mmHGD BRACING ROD AT EACH LOT BOUNDARY &
TENSIONER WITH PAINTED COLD GALVANISED ENDS POST WITH CONCRETE FOOTING TO EACH SIDE LOT
100mm X 100mm H4 TREATED HARDWOOD 12mm HDG ROD DIAGONAL BRACING
PLATES & WELDS. HDG COACH SCREW END PLATES BOUNDARY POINT.
POST 10mm ARRIS TO VERTICAL EDGES WELDED TO FRAME CORNERS
CENTRALLY TO POST BASE AND TOP OF POST
TYPICAL ELEVATION OF FENCE TYPE F1 VEHICLE & PEDESTRIAN ACCESS GATE TO FENCE TYPE F1
01 SCALE: 1:50 02 NOTE: REFER TYPICAL PLAN BELOW
SCALE: 1:50
PROPERTY
BOUNDARY
NORTH POINT / SCALE
INFILL CONNECTIONS TO TRACKS N
WITH P1 AS SPECIFIED
100mm X 100mm H4 TREATED HARDWOOD TOP RAIL 10mm
ARRIS TO TOP SIDE REFER SPECIFICATION FOR FINISH
00
.9
IN
M 0 200 400 600 800 1.0 1.2 1.4 1.6 1.8 2.0m
HDG ANGLE BRACKET 100mm X 100mm X 75mm X 4mm FIXED PROPERTY BOUNDARY
TO TIMBER TOP RAIL AND POSTS WITH M12 BOLTS
1600
1500
1:20 (Original Sheet Size: A1)
Verify all dimensions on site prior to construction. Do not scale from drawing.
GALVANISED FENCING WIRE @ 250MM CCS. REFER
All dimensions in millimetres unless otherwise stated.
250
SPECIFICATION FOR TYPE
150
100mm X 100mm H4 TREATED HARDWOOD POST 10mm ARRIS
PROPERTY BOUNDARY
TO VERTICAL EDGES
600
N25 CONCRETE FOOTING MIN
100mm COVER OP3 RFI RESPONSE 25.06.14 JL
OP2 OPERATIONAL WORKS 23.04.14 WW
NOTE: OP1 OPERATIONAL WORKS 17.03.14 JL
BRACE RODS TO ALL POSTS ISSUE DESCRIPTION DATE CHECK
AT DIRECTION CHANGES
SC SC WW 25.06.14
DESIGN DRAWN CHECK DATE
CAD Ref: P:\Projects\60314304\5. CADD\5.3 Working\5.3.1Sheets\Stage C\L-4304-STAGE C-903
PAVEMENT FINISH REFER TO PLANS
PROJECT NUMBER
6031 4304.01
PROJECT
DOONELLA
STAGE C
DRAWING TITLE
-
FENCE TYPE F1 - TYPICAL SECTION
-
VEHICLE & PEDESTRIAN ACCESS GATE TO FENCE TYPE F1 DETAILS
03 SCALE: 1:20
NOOSA COUNCIL 04 NOTE: REFER TYPICAL PLAN BELOW
APPROVED PLANS SCALE: 1:50
OPW14/0197 3 OCT 2014
STATUS DRAWING ISSUE
OP3 L-4304-STAGE C-903 OP3
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.