Council archive · source document
07/0786 - Response to Information Request [As Published] · 132007.786
Page 2 2.0 Revised plans showing a greater setback from the frontage. it is noted that the neighbouring dwellings do have single story garages located within the setback area. However, this proposal is vastly different in that a 2-storey building will occupy most of the frontage area. This does not conform to the existing development in the vicinity. Applicants Response The proposed plans have been amended to reflect a greater setback to the front boundary. Apart from the garage, the main building line has been moved back to a minimum of 4.5m from the boundary. The fist floor plan shows those elements of the front elevation encroaching upon the 6m setback requirement. The stepped design in conjunction with the orientation of the building in general mean that the portion the front fagade encroaching upon the setback is limited to the corners of the dressing room, stairwell and outside shower area, as well as the adjoining areas at ground level. Importantly, the portion of the main building line between the 6m and 4.5 m setback is limited to less tan 50% of the total front elevation mass. Apart from the above, a greater level of articulation, including changes in materials, has been included to the front elevation. Lightweight materials in the form of cladding and vertical timber slats help to reduce the overall massing effect when viewed from the street level. In conclusion, whilst it is agreed that the majority of setback encroachments within the street are limited to garage structures, the impact of some these structures is no less obtrusive than that of the proposed dwelling. A review of the aerial photo at Attachment A shows the number of these garage structures that have been constructed almost to the front boundaries of lots. Furthermore, several of these structures are higher than a typical 1 storey garage with some structures at a similar scale to the main elevation of the proposed building. It is suggested that the combination of almost zero setbacks and double storey design of these garage structures within the street has a comparable impact to the proposed dwelling and garage. 3.0 The fence and retaining walls adjacent to the garage appear to be over the 2.0 metre maximum required height. Forward revised plans or justify the concession required. Applicants Response A built to boundary wall meeting the requirement of the QDC forms part of the garage on the north- western elevation. No fencing is indicated on the boundary either forward or rear of this wall. 4.0 Please indicate how the building will achieve the Specific Outcome in relation to height and number of storeys. Noosa Plan - Building Works Code Table 14.41. Specific Outcomes 06. Further section plans are needed to satisfy Council that the building is not 3-stories. Applicants Response The proposed design is a maximum of 2 storeys and 8m in height at any point on the elevation. Sections BB to FF on the revised plans indicate the maximum height of the building as it steps down the slope from front to rear. The bulk of the structure is well below the maximum height limit. Section AA clearly indicates that the building at no point exceeds the 2 storey maximum. The portion of the basement protruding in excess of 1m above natural ground level is located aft of the first floor
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
07/0786 - Response to Information Request [As Published]Related documentApplication case desk ↗
About this file
- File size
- 1.6 MB (small file)
- File type
No other editions are linked here.