Original source · versioned page text
Attachment 4 - Decision Notice MCU16 0130
Attached to the e-mail Change to DA - MCU16/0130.01.msg.
12. The requirements of this condition must be included in the Community Management
Statement for any body corporate for the subject site.
13. Service vehicle movements associated with the approved use (including loading and
unloading) must not occur outside the hours of 7am to 6pm Monday to Saturday and not
at all on Sundays or public holidays. The requirements of this condition must be included
in the Community Management Statement for any body corporate for the subject site.
Building Appearance
14. The development must be finished with subdued external building colours.
Noise
15. Mechanical plant and equipment, a/c units, motors, refrigeration equipment,
compressors, pumps etc on site should be situated within the building or suitably
provided with noise reduction measures and located as to prevent a noise nuisance
beyond the boundary of the premises and not exceed the levels specified in Table 1.
TABLE 1
NOISE LIMITS AT A SENSITIVE RECEPTOR
Noise level at noise sensitive place measured as the
PERIOD
adjusted maximum sound pressure level (L10, adj,T)
7am – 6pm Background noise level (L90,T) plus 5 dB(A)
6pm – 10pm Background noise level plus 5 dB(A)
10pm – 7am Inaudible
NOISE LIMITS AT A COMMERCIAL PLACE
Noise level at a commercial place measured as the adjusted
PERIOD
maximum sound pressure level (L10, adj,T)
7am – 6pm Background noise level (L90,T) plus 10 dB(A)
6pm – 10pm Background noise level plus10 dB(A)
10pm – 7am Background noise level plus 8 dB(A)
16. When requested by Council, a Noise Impact Assessment Report (NIAR) showing
monitoring and recording of noise levels must be undertaken to investigate any
complaint (other than a frivolous or vexatious complaint) caused by noise emissions
from operations at the premises. Such monitoring must be undertaken within a
reasonable and practicable timeframe nominated by Council and be performed by a
suitably qualified person in accordance with accepted guidelines and standards. The
report is to be submitted to Council detailing the results of such monitoring and
recommendations for any measures to achieve compliance with limits outlined in Table
1 of this Decision Notice.
17. Measurement of sound pressure levels (adjusted for tonality and impulse) must be in
accordance with Australian Standard AS1055.1 “Acoustics – Description and
measurement of environmental noise – General procedures”.
18. For the purpose of measuring and certifying relevant noise conditions and reporting (eg.
equipment, air conditioning units, motors, electrical generators, compressors, etc), a
suitably qualified person is either:
a. a Registered Professional Engineer of Queensland, or
b. an environmental consultant with a minimum of 3 years current experience in the
field of acoustics.
Page 3 of 10
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.