Original source · versioned page text
Attachment 4 - Decision Notice MCU16 0130
Attached to the e-mail Change to DA - MCU16/0130.01.msg.
Lighting
19. Light sources at the premises must be positioned and shielded to prevent light spillage
outside the boundaries of the premises.
20. When requested by Council, a Lighting Report (LR) showing monitoring and recording
of lighting levels must be undertaken to investigate any complaint (other than a frivolous
or vexatious complaint) caused by light emissions from the premises. Such monitoring
must be undertaken within a reasonable and practicable timeframe nominated by
Council and be performed by a suitably qualified person in accordance with the relevant
Standard. The report is to be submitted to Council detailing the results of such
monitoring and recommendations for any measures to achieve compliance with the
Standard or as otherwise directed.
21. Outdoor lighting associated with the premises must be designed, sited, installed and
operated to comply with Table 2.1 & 2.2 of Australian Standard AS4282-1997 “Control
of the obtrusive effects of outdoor lighting” using a control level of 1.
Landscaping Works
22. The development site must be landscaped. The works must be undertaken in
accordance with an Operational Works approval, Planning Scheme Policy 3
“Landscaping Plants and Guidelines” and properly prepared landscape plan by a
qualified person* and must include in particular:
a. The landscaping areas shown on the approved Floor Plan (Plan No. SK02-02,
dated 02/02/2017);
b. A minimum 3 metre wide densely planted landscaping strip to the full length of the
sites frontage to Eumundi Noosa Road (excluding location for driveway and
crossovers). Landscaping must provide visual buffering of the development from
the road through the planting of vegetation that is in scale with the building;
c. A minimum 2 metre wide densely planted landscaping strip to the full length of the
eastern and southern boundary. Landscaping must provide visual buffering of the
development from any adjoining residential properties through selection of
appropriate species achieving adequate heights; and
d. One x 100 litre street tree with a mature height of 4m located within the road
reserve south of the existing crossover.
23. All landscape works must be established and maintained in accordance with the
approved design for the life of the development, and in a manner that ensures healthy,
sustained and vigorous plant growth. All plant material must be allowed to grow to full
form and be refurbished when its life expectancy is reached.
Waste Disposal
24. The developer must provide waste storage and disposal facilities in accordance with
Planning Scheme Policy No. 9 “Waste Management Multi-Dwellings and Commercial
and Industrial Premises”. The facilities must include an external impervious area
correctly sized for all refuse and recycling containers and suitably screened from public
places and neighbouring properties. A bin wash area is required with a cold-water tap,
hose and drain outlet connected to sewer, via a bucket trap. The drain outlet must be
designed to prevent storm water entry to the sewerage system. This can be achieved
with a nib wall 50mm high and up to 700mm x 700mm wide (max 0.5m²), or alternatively
the waste area can be roofed, or any other design approved by Council.
25. Refuse containers must be provided in accordance with the requirements of the
Environmental Protection (Interim Waste) Regulation 1996 and (Waste Management)
Regulation 2000, for the storage and collection of refuse.
Page 4 of 10
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.