Original source · versioned page text
Architectural Plans 08.02.22
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn main bathroom in accordance with the Queensland Plumbing Ensure that all persons below the work area have Personal Protective regularly checked and Personal Protective Equipment should be used collapse. Warning signs and barriers to prevent accidental or
and Wastewater Code. Equipment. in accordance with manufacturer’s specification. unauthorised access to all excavations should be provided.
¿ play your part - print on recycled paper
Safety Notes Building components Hazardous substances Enclosed spaces
Falls, slips, trips During construction, renovation or demolition of this building, parts of Asbestos Enclosed spaces within this building may present a risk to persons
Working at heights during construction the structure including fabricated steelwork, heavy panels and many This site currently has an existing home to be demolished. The entering for construction, maintenance or any other purpose. The
Wherever possible, components for this building should be other components will remain standing prior to or after supporting parts demolition works are to be designed and detailed by others. The builder design documentation calls for warning signs and barriers to
prefabricated off-site or at ground level to minimise the risk of workers are in place. Contractors should ensure that temporary bracing or other should check and, if necessary, take appropriate action before unauthorised access. These should be maintained throughout the life of
falling more than two metres. However, construction of this building will required support is in place at all times when collapse which may injure commencement of works to ensure that the removal of any existing the building. Where workers are required to enter enclosed spaces, air
require workers to be working at heights where a fall in excess of two persons in the area is a possibility. hazardous materials that may be present on the site. Should any testing equipment and Personal Protective Equipment should be
metres is possible and injury is likely to result from such a fall. The remains of hazardous materials be discovered the builder shall to steps provided.
builder should provide a suitable barrier wherever a person is required Mechanical lifting of materials and components during construction, as deemed appropriate to remove such hazardous materials.
to work in a situation where falling more than two metres is a possibility. maintenance or demolition presents a risk of falling objects. Small spaces
Contractors should ensure that appropriate lifting devices are used, Powdered materials Some small spaces within this building will require access by
Working at heights during operation and/or maintenance that loads are properly secured and that access to areas below the Many materials used in the construction of this building can cause construction or maintenance workers. The design documentation calls
Cleaning and maintenance of windows, walls, roof or other components load is prevented or restricted. harm if inhaled in powdered form. Persons working on or in the building for warning signs and barriers to unauthorised access. These should be
of this building will require persons to be situated where a fall from a during construction, operational maintenance or demolition should maintained throughout the life of the building. Where workers are
height in excess of two metres is possible. Where this type of activity is ensure good ventilation and wear Personal Protective Equipment required to enter small spaces they should be scheduled so that
required, scaffolding, fall barriers or Personal Protective Equipment Traffic Management including protection against inhalation while using powdered material or access is for short periods. Manual lifting and other manual activity
should be used in accordance with relevant codes of practice, Parking of vehicles or loading/unloading of vehicles on this roadway when sanding, drilling, cutting or otherwise disturbing or creating should be restricted in small spaces.
regulations or legislation. may cause a traffic hazard. During construction, maintenance or powdered material.
demolition of this building designated parking for workers and loading Public Access
Anchorage points for portable scaffold or fall arrest devices have been areas should be provided. Trained traffic management personnel Treated timber Public access to construction and demolition sites and to areas under
included in the design for use by maintenance workers. Any persons should be responsible for the supervision of these areas. The design of this building includes provision for the inclusion of treated maintenance causes risk to workers and public. Warning signs and
engaged to work on the building after completion of construction work timber within the structure. Dust or fumes from this material can be secure barriers to unauthorised access should be provided. Where
should be informed about the anchorage points. Construction of this building will require loading and unloading of harmful. Persons working on or in the building during construction, electrical installations, excavations, plant or loose materials are present
materials on the roadway. Deliveries should be well planned to avoid operational maintenance or demolition should ensure good ventilation they should be secured when not fully supervised.
Slippery or uneven surfaces congestion of loading areas and trained traffic management personnel and wear Personal Protective Equipment including protection against
Floor finishes should be used to supervise loading/unloading areas. inhalation of harmful material when sanding, drilling, cutting or using Operation use of the building
Where specified finishes have been selected to minimise the risk of treated timber in any way that may cause harmful material to be This building has been designed as a residential building. If it, at a later
floors and paved areas becoming slippery when wet or when walked on Busy construction and demolition sites present a risk of collision where released. Do not burn treated timber. date, is used or intended to be used as a workplace, the provisions of
with wet shoes/feet. Any changes to the specified finish should be deliveries and other traffic are moving within the site. A traffic the Work Health and Safety Act 2011 or subsequent replacement Act
made in consultation with the designer or, if this is not practical, management plan supervised by trained traffic management personnel Volatile organic compounds should be applied to the new use.
surfaces with an equivalent or better slip resistance should be chosen. should be adopted for the work site when appropriate as determined by Many types of glue, solvents, spray packs, paints, varnishes and some
the builder. cleaning materials and disinfectants have dangerous emissions. Areas Other high risk activity
The owner is responsible for the selection of surface finishes in the where these are used should be kept well ventilated while the material All electrical work should be carried out in accordance with Code of
pedestrian trafficable areas of this building. Surfaces should be Services is being used and for a period after installation. Personal Protective Practice: Managing Electrical Risks at the Workplace, AS/NZ 3012 and
selected in accordance with AS HB 197:1999 and AS/NZ 4586:2004. Rupture of services during excavation or other activity creates a variety Equipment may also be required. The manufacturer’s all licensing requirements.
of risks including release of hazardous material. Existing services are recommendations for use must be carefully considered at all times. All work using Plant should be carried out in accordance with Code of
Steps, loose objects and uneven surfaces located on or around this site. Where known, these are identified on the Practice: Managing Risks of Plant at the Workplace.
Due to design restrictions for this building, steps and/or ramps are plans but the exact location and extent of services may vary from that Synthetic mineral fibre All work should be carried out in accordance with Code of Practice:
included in the building which may be a hazard to workers carrying indicated. Services should be located using an appropriate service Fibreglass, rockwool, ceramic and other material used for thermal or Managing Noise and Preventing Hearing Loss at Work.
objects or otherwise occupied. Steps should be clearly marked with (such as Dial Before You Dig), appropriate excavation practice should sound insulation may contain synthetic mineral fibre which may be Due to the history of serious incidents it is recommended that particular
both visual and tactile warning during construction, maintenance, be used and, where necessary, specialist contractors should be used. harmful if inhaled or if it comes in contact with the skin, eyes or other care be exercised when undertaking work involving steel construction
demolition and at all times when the building operates as a workplace. sensitive parts or the body. Personal Protective Equipment including and concrete placement.
Overhead power lines are near or on this site. These pose a risk of protection against inhalation of harmful material should be used when
Building owners and occupiers should monitor the pedestrian access electrocution if struck or approached by lifting devices or other plant installing, removing or working near bulk insulation material.
ways and in particular access to areas where maintenance is routinely and persons working above ground level. Where there is a danger of
carried out to ensure that surfaces have not moved or cracked so that this occurring, power lines should be, where practical, disconnected or Timber finishes
they become uneven and present a trip hazard. Spills, loose material, relocated. Where this is not practical adequate warning in the form of This building contains finished timber products which have an applied
stray objects or any other matter that may cause a slip or trip hazard bright coloured tape or signage should be used or a protective barrier finish. Areas where finishes are applied should be kept well ventilated
should be cleaned or removed from access ways. provided. during sanding and application and for a period after installation.
Personal Protective Equipment may also be required. The
Contractors should be required to maintain a tidy work site during Manual tasks manufacturer’s recommendations for use must be carefully considered
construction, maintenance or demolition to reduce the risk of trips and Components within this design with a mass in excess of 25kg should at all times.
falls in the workplace. Materials for construction or maintenance should be lifted by two or more workers or by mechanical lifting device. Where
be stored in designated areas away from access ways and work areas. this is not practical, suppliers or fabricators should be required to limit Confined spaces
the component mass. Excavation
Falling objects Construction of this building and some maintenance on the building will
Loose materials or small objects All material packaging, building and maintenance components should require excavation and installation of items within excavations. Where
Construction, maintenance or demolition work on or around this clearly show the total mass of packages and where practical all items practical, installation should be carried out using methods which do not
building is likely to involve persons working above ground level or should be stored on site in a way which minimises bending before require workers to enter the excavation. Where this is not practical,
above floor levels. Where this occurs one or more of the following lifting. Advice should be provided on safe lifting methods in all areas adequate support for the excavated area should be provided to prevent
measures should be taken to avoid objects falling from the area where where lifting may occur. collapse. Warning signs and barriers to prevent accidental or
the work is being carried out onto persons below. unauthorised access to all excavations should be provided.
Prevent or restrict access to areas below where the work is being Construction, maintenance and demolition of this building will require
carried out. the use of portable tools and equipment. These should be fully Enclosed spaces
Provide toeboards to scaffolding or work platforms. maintained in accordance with manufacturer’s specifications and not Enclosed spaces within this building may present a risk to persons
Provide protective structure below the work area. used where faulty or (in the case of electrical equipment) not carrying a entering for construction, maintenance or any other purpose. The
Ensure that all persons below the work area have Personal Protective current electrical safety tag. All safety guards or devices should be design documentation calls for warning signs and barriers to
Equipment. regularly checked and Personal Protective Equipment should be used unauthorised access. These should be maintained throughout the life of
in accordance with manufacturer’s specification. the building. Where workers are required to enter enclosed spaces, air
Building components testing equipment and Personal Protective Equipment should be /Users/benthornton/Dropbox/My Mac (Bens-iMac)/Documents/Cadfiles/2001 -
Kirkman/Archicad/20092021/2001.pln
During construction, renovation or demolition of this building, parts of Hazardous substances provided.
sbt designs pty ltd t/a
the structure including fabricated steelwork, heavy panels and many Asbestos lot no. --
Skale Building Design
other components will remain project Residence
standing prior to or after supporting parts This site currently has an existing home to be demolished. The
B
Small spaces
BA Issue 8/2/22
project number
Mobile: 0412 025 657
are in place. Contractors should
for ensure that temporary
David & JanbracingKirkman
or other demolition works are toplan no. and detailed by others. The builder --Some small spaces
be designed
P1 BA Issue
within this building will require access by
13/8/21
2001
skale
required support is in place at all times when collapse which may injure should check and, if necessary, take appropriate action before construction or maintenance workers. The design documentation calls
skale.com.au persons in the area is a possibility. U2/16 Barbados Court drawn
commencement of works to ensure that the removal of any existing
BT
for warning signs and barriers to unauthorised access. These should be
drawing number
[email protected]
building design A.C.N. 123 976 296 QBCC: 1143 609 at Noosa Sound
Mechanical lifting of materials and components during construction,
scale
hazardous materials that (A3) on the site. Should any 1:100maintained
may be present Rev throughout
Details the life of the building. Where workers are Date 1.1 B © Skale Building Design
remains of hazardous materials be discovered the builder shall to steps required to enter small spaces they should be scheduled so that
maintenance or demolition presents a risk of falling objects.
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.