Council archive · source document
Town Planning Assessment Report · MCU25/0087
c. retains natural vegetation sites on the
that assists in screening or property; and
visually softening ii. construction
development; and utilises suspended
d. uses materials, finishes and floors or pole
colours that complement footings rather
the natural setting and than slab on
integrate with the landscape ground
and skyline. construction.
AO20.2 On sloping sites or on
ridgelines at the uppermost edge Can comply
of a hill slope:
a. roof lines are generally
parallel with contours of
the land;
b. roofs do not exceed a pitch
of 15 degrees;
c. buildings do not protrude
above the height of
prevailing vegetation; and
d. undercroft areas exceeding
1.5 metres in height are
screened with landscaping
or battens.
Editor's note—refer to Figure AP3-3B
AO20.3 On sloping sites slab on
ground construction is avoided to Can comply
minimise building bulk and
benching of the site. Split-level
buildings with small floorplates are
used as an alternative. Post and
beam construction or suspended
floor or pole footings may be
appropriate.
Editor's note—refer to Figure 6.9.1A
and Figure 6.9.1B
AO20.4 Buildings:
Can comply - Refer elevations
a. are constructed in
and render images.
lightweight materials such
as timber or board,
stainless steel, glass and
corrugated iron;
b. are finished with exterior
colours of moderate to
darker shades of olive
22
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Town Planning Assessment Report.pdfRelated documentApplication case desk ↗
About this file
- File size
- 4.2 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.