Council archive · source document
Town Planning Assessment Report · MCU25/0087
moderate, high and very high for this application.
landslide hazard areas and areas
with 15% slope or greater, as
determined by a site-specific
slope-analysis.
Editor's Note—A site- specific
geotechnical assessment may be used
to demonstrate that although the
proposed development is shown on the
Landslide Hazard Overlay as being in
the moderate, high or very high
landslide hazard area, the landslide risk
is low or very low.
OR
AO22.3
A site-specific geotechnical
assessment is prepared by a
registered professional engineer to
certify that:
a. the stability of the site,
including associated
buildings and
infrastructure, will be
maintained and
operational for the life
of the development;
b. the site is not subject
to the risk of landslide
activity originating from
other land, including
land above the site;
and
c. development of the site
will not increase the
risk of landslide activity
on other land.
Editor's Note— PSP8 Natural Hazards
provides further guidance on assessing
landslide hazard.
AO22.4
Any specific measures identified in
a site specific geotechnical
assessment for stabilising the site
or development are to be fully
implemented.
Coastal Protection and Scenic Amenity Overlay Code
30
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Town Planning Assessment Report.pdfRelated documentApplication case desk ↗
About this file
- File size
- 4.2 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.