Original source · versioned page text
Att 3 - SDAP compliance
Attached to the e-mail Retail Bus Type 2 Shop & Salon, Multiple Housing Type 4 Conventional (2 units) & Boundary Realignment (3 lots into 3) - MCU18/0158 & RAL18/0017.
Performance outcomes Acceptable outcomes Response
apply:
AO25.2 Buildings which include indoor education
areas and indoor play areas are setback the
maximum distance possible from a state-
controlled road or type 1 multi-modal corridor.
AND
AO25.3 Buildings are designed and oriented so N/A
that indoor
education areas and indoor play areas are
located furthest from the state-controlled road or
type 1 multi-modal corridor.
AND
AO25.4 Buildings are designed and constructed N/A
using materials which ensure indoor education
areas and indoor play areas meet the following
internal noise criteria:
1. ≤35 dB(A) Leq (1 hour) (maximum hour
during opening hours).
Statutory note: Noise levels from a state-controlled
road or type 1 multi-modal corridor are to be
measured in accordance with AS1055.1–1997
Acoustics – Description and measurement of
environmental noise.
Note: To demonstrate compliance with the acceptable
outcome, it is recommended that a RPEQ certified
noise assessment report, prepared in accordance
with the State Development Assessment Provisions
Supporting Information – Community Amenity (Noise),
Department of Transport and Main Roads, 2013, is
provided.
PO26 Development involving a: AO26.1 A noise barrier or earth mound is N/A
1. child care centre; or provided which is designed, sited and
2. educational establishment constructed:
State Development Assessment Provisions – version 2.0
State code 1: Development in a state-controlled road environment Page 14 of 19
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.