Response to Council's Information Request

                                                                       DANYA COOK TOWN PLANNING


Information Required:

2.        Provide detail on how stormwater runoff from the lots will be collected, conveyed and discharged. The detail and plans
          must be prepared by a Registered Professional Engineer of Queensland (RPEQ) and indicate any necessary easements.

Applicant’s Response

In response to Item 2 of Council’s Information Request, please refer to the Stormwater Layout Plan prepared by Blackall Range
Consulting Engineer included at Appendix A, which demonstrates how stormwater runoff from proposed Lot 401 and Lot 402 will be
collected, conveyed and discharged. It is advised that stormwater associated with Lot 201 will continue to be collected, conveyed
and discharged to Ward Street.

Items 3 – 5 – Access

Issue:

Council has concerns with the functionality of the proposed access and access easement for Lots 401 and 402. The access easement
is lengthy (approximately 60m) and has a bend which impedes sight lines.

Information Required:

3.        Indicate if the proposed vehicle access to Lot 401 will be from the access driveway.

Applicant’s Response

In response to Item 3 of Council’s Information Request, as demonstrated by the Plan of Development, Plan of Proposed Subdivision
included at Appendix B, the vehicle access to proposed Lot 401 is via the access driveway shared with proposed Lot 402.

4.        Given the length and shape of the access driveway Council considers that vehicles must be able to travel in a forward gear.
          In this regard provide an indicative house design for Lot 402 that includes a manoeuvring area for a B99 vehicle within the
          lot.

Applicant’s Response

In response to Item 4 of Council’s Information Request, please refer to the Design Plans prepared by Graham Green Design Drafting
included at Appendix C, which provides indicative house designs for both Lot 401 and Lot 402.

5.        Provide a preliminary engineering design of the access driveway. The design must be prepared by a Registered Professional
          Engineer of Queensland (RPEQ) and:
          a. extend from the existing formation in Hay Street to the common boundary of Lots 401 and 402, and
          b. include any necessary passing opportunities at the entrance to the site or along the access driveway.

Applicant’s Response

In response to Item 5 of Council’s Information Request, please refer to the Preliminary Engineering Plans prepared by Blackall Range
Consulting Engineer included at Appendix A, which provides preliminary engineering design of the access driveway extending in from
the existing formation in Hay Street to the common boundary of proposed Lot 401 and Lot 402 and includes a passing opportunity
along the access driveway.

Item 6 – Existing Improvements within Lot 201

Issue:

The submitted material does not provide any detail on existing improvements within Lot 201 that need to be relocated/removed due
to the new boundary alignment.

Information Required:



                                                                  2


Response to Council’s Information Request                                                                             September 2021