Minor Change Report 132004 240022 3 (As Published) · 132004.240022.3

               Areas on which vehicles will be driven and/or parked are to be provided with a flexible or other
               pavement surfaced with bitumen seal coat, asphaltic or other concrete properly constructed and
               maintained to good engineering standards to the satisfaction of the Council’s Engineer. Plans and
               specifications for such areas including footpath crossings are to be submitted for approval prior to
               issue of a Building Permit. Vehicular access to and from the site is to be designed so as to ensure
               that sufficient area is available for manoeuvring and turning to permit forward movement to and
               from the road.
               The entrance to the car park shall have a minimum clearance of 2.1m as defined in Australian
               Standard A.S. 2890.1-1986 Car Parking Facilities. Allowance shall be made for required height of
               service vehicles, where applicable.
               The car park shall be available for use by members of the public. Signposting shall be provided in
               accordance with the requirements of the Shire Engineer at the access point. Parking spaces
               available for public use inside the building shall be clearly marked. Car Park entry may be subject
               to payment of a fee.
               C.     Correct the numbering of the conditions to ensure clarity and consistency.




                                                                                                    Page 11 of 11

Document Set ID: 24127425
Version: 11, Version Date: 14/10/2025