Council archive · source document
Minor Change Report 132004 240022 3 (As Published) · 132004.240022.3
it is not expected a reduction in long term parking will increase the demand of street parking.
Service vehicles access will remain as existing, utilising the service / loading area adjacent to the
porte-cochere.
Swept path analysis of a B85 and B99 vehicle demonstrate the porte-cochere has sufficient
circulation area including the proposed parking arrangements. Signs and line markings have been
included for increased pedestrian safety.
5. CONCLUSION & REASONS FOR DECISION
The proposed development generally complies with the requirements of the planning scheme and
does not raise any significant issues that cannot be addressed by reasonable and relevant
conditions. The application is therefore recommended for approval. The report is provided in
accordance with Section 83(9) of the Planning Act 2016.
RECOMMENDATION
With regard to Application No. 132004.240022.3 to make a minor change to an existing approval
situated at Sofitel Noosa Pacific Resort 14 Hastings Street Noosa Heads and described as Lot 7
RP 802632, Council on 2 October 2025 decided to:
A. Approve the change.
B. Agree to add additional Condition 27 & 28 to read as follows:
27 Works approved by change application 132004.240022.3 are to be in accordance with the
following plans.
Plan No. Rev. Plan/Document Name Date
53.025.B01 A Level 1 prepared by DesignInc Brisbane Pty 04.03.2004
Ltd
WD.03.01
250137 A Site Plan prepared by Richmond and Ross 08.09.2025
CO10
P3275 01 Signage and Linemarking Plan prepared by 09.09.2025
ASON Group
AG01
241424 24 Building Elevations – Hasting Street 03.09.2025
prepared by CE Architects
WD.04.06
Annotated by Council
28. The developer shall provide a minimum of 174 parking bays (with a maximum of 22 bays in
tandem configuration) and 3 loading bays on site. Each car parking space shall not be less than 5.
5 metres in length and not less than 2.6 metres in clear width. Parking bay dimensions are to be
in accordance with the above, unless otherwise supported in writing by an RPEQ.
Aisle widths are desirable 6.5m width but shall not be less than 6.0 metres as detailed, on Council’
s Standard Drawing No. 9515. For blind aisles an aisle extension of 2m is to be provided to permit
vehicle manoeuvre out of the end bays. Extra width is required on the end bay adjoining a blind
aisle. Aisle widths are to be in accordance with the above., unless otherwise supported in writing
by an RPEQ.
Page 10 of 11
Document Set ID: 24127425
Version: 11, Version Date: 14/10/2025
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Minor Change Report 132004 240022 3 (As Published).pdfRelated documentApplication case desk ↗
About this file
- File size
- 2.7 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.