Request for Further Information - 010.2008.00000176.001 [As Published] · 132008.176

                                                -4-


      All future Landscaping Drawings submitted for approval shall clearly demonstrate
      compliance with this requirement.
Environmental Health
31.   Demonstrate that vehicles associated with the collection of waste/recyclables can
      enter and leave the site in a forward direction to access any off-street refuse-loading
      areas.
32.   A Waste Management Proposal Plan generally in accordance with Planning Scheme
      Policy No. 9 “Waste Management - Multi-Dwellings and Commercial and Industrial
      Premises” for the day-to-day operation of the development. It is critical that waste
      areas are properly planned. A copy of Planning Scheme Policy No. 9 explaining
      exactly how to predict waste quantities and design waste areas is available from
      Council and the web. The Plan shall include the following information: -
      32.1. The types of waste that will be generated from the activities approved within
            the development.
      32.2. Estimated volumes or tonnage of both recyclables and waste generated.
      32.3. Methods to be used for dealing with garden waste.
      32.4. Initiatives to minimize waste either by waste prevention, reduction, re-use or
            recycling.
      32.5. Description of procedures for getting all waste to the bins; the storage of bins
            and the collection of bins by the contractor.
      32.6. A description of the design details of waste storage and recycling areas
            including size, location, elevation and floor plan, methods of bin washing and
            system to prevent storm water getting into sewer via the bin wash.
      32.7. A description of types and volume of waste storage containers to be used.
      32.8. The waste and recycling storage area shall include the provision of containers
            for all waste and recycling materials including putresable matter, non-recycling
            waste, paper/ cardboard, glass, aluminum/steel cans, waste oil, styrofoam
            boxes, etc, and bin washing facilities connected to sewer. Note: The
            residential component is also required to have recycling facilities.
      32.9. A detailed description of vehicular access to collect waste. Where collection is
            off street, access must allow vehicles to enter and leave the site in a forward
            direction.
33.   Refuse chutes must be provided in accordance with Council’s Policy for “Refuse
      Chutes and Accessories in Multi Storey Buildings”.
34.   All liquid waste produced by the commercial section of the development is “Trade
      Waste” and is to be treated as required under the Noosa Trade Waste Policy prior to
      release to the sewer. Provide details of access to each grease arrestor for cleaning
      and servicing purposes.
      Note: Any car wash facilities will require pretreatment prior to connection to sewer
      and must be roofed.
35.   In relation to the kitchen facilities, supply details of:
      35.1. Estimated maximum number of diners at the conference and restaurant areas,
      35.2. Estimated area of the kitchen and food storage areas,