Council archive · source document
16003 - Stormwater Quantity Assessment Letter - 17-09-20 · OPW17/0554
Attached to the e-mail Operational Works Application OPW17/0554.
MORGAN CONSULTING
E NGINEERS P TY LTD
16003/CG
Page 3
Figure 2: XP-RAFTS Pre Development Model
Table 1 summarises the input parameters used in the XP-RAFTS pre development model for
each of the nodes described above. Pervious and impervious areas were measured from the
detailed survey plan for the site. The detailed survey of the site was used to determine the
vectored slope while aerial photos and findings from the site visit were used to determine
the Manning’s n for each of the sub-catchments.
Table 1: XP-RAFTS Source Node Parameters
Pre Development
Parameter
Pervious Impervious
Catchment Catchment
Initial Loss (mm) 10 0
Continuous Loss
2.5 0
(mm/hr)
Manning's "n" 0.035 0.015
IFD Coefficient Noosa Noosa
Storage Coefficient 1.0 1.0
No input parameters were used for the nodes representing the existing drainage
infrastructure within Resort Drive at each of the drainage outlet points. The legal point of
discharge for the site, Resort Drive and contributing catchments is represented by the LPD
node at the end of the model.
Table 2 summarises the pre development 1 year ARI storm peak discharges calculated by XP-
RAFTS.
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
16003 - Stormwater Quantity Assessment Letter - 17-09-20.pdfRelated documentApplication case desk ↗
About this file
- File size
- 5.4 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.