Original source · versioned page text
2019-12-11 SM Agenda - Item 1 - Attachment 4 - Final New Noosa Plan Part 8-9 Schedule Appendix Track Change version
The original of this document is very large (14.9 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Text sections have not been matched to the original PDF pages. Use the original document to check page numbers.
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn Performance Outcomes Acceptable Outcomes
Landings are not roofed. No acceptable outcome provided
Table 9.4.11.9.3 Criteria for assessment (part)
Performance Outcomes Acceptable Outcomes
Design, Construction and Safety for Jetties within Noosa Waters Estate waterways
PO18 AO18
Structures such as handrails, light bollards, piers and pumping No acceptable outcome provided.
equipment for semisubmersible floating docks have a
maximum height of 1100mm above the jetty floor.
PO19 AO19.1
Development is designed and constructed for the sole purpose Jetties—
of providing access to vessels and are sited and designed to (a) are a maximum width of 1.5 metres;
avoid—
(b) a maximum length of a jetty head is not more than 7
(a) cluttering of waterways; metres (Refer Figure 9.4.10.9.3C);
(b) excessive traffic volumes within foreshore areas, on (c) constructed predominantly of timber;
adjoining lands and within the waterway; and
(d) are not constructed parallel to the revetment wall; and
(c) unacceptable risks to personal and public safety. extend a maximum of 10 metres past the quayline.
AO19.2
For “Y” and “T” shaped jetty heads or other shaped jetty heads
—
(a) a maximum area of 10.5m² excluding any walkway is
provided; and
(b) a walkway with a minimum length of 3 metres is
provided to the jetty head (Refer Figure 9.4.10.9.3D).
AO19.3
Jetties have independent support structures and are not
supported by the revetment wall.
AO19.4
Seep holes in the revetment wall are not obstructed by any jetty.
AO19.5
For lots comprising a dwelling house or dual occupancy, a
maximum of one jetty per development is constructed.
AO19.6
Multiple dwellings with common property along the waterway
frontage meet the following—
(a) a maximum of 2 jetties per multiple dwelling;
(b) jetties are shared between unit owners;
(c) a minimum of 20 metres separation is provided between
each jetty;
(d) the jetty is setback a minimum of 3 metres from the
prolongation of boundaries; and
(e) jetty heads and pontoons are not constructed (Refer
Figure 9.4.10.9.3F).
AO19.7
For multiple dwellings where each unit has its own individual
canal frontage—
(a) a joint application with the adjoining owner is made; and
**FINAL DRAFT Post Consultation 2019** Page 6 of 14
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalVery large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.