Planning Report · OPW22/0093

  Low Density Housing Code                AO8.1
                                          Driveways and crossovers are designed to comply with Council's
                                          standard drawings RS-049, RS-050, RS-056 and addendum as
                                          applicable.




  Comment:

  Minor technical non-compliance has been identified. The proposed crossover does not taper down to a
  4m width at the W2 section due to the location of the required crossover and non-standard front boundary
  alignment.

  The crossover acheives a 5m width at the kerb and 6m at the boundary in the location of the proposed
  carport to front boundary.

  Overall, the crossover is safe and convenient for vehicles accessing the site. Noting the local cul-de-sac
  location, pedestrian and cyclist will not impacted by the crossover. The gradient will be standard and there
  will be no impact with regards to stormwater disposal on adjoining properties or surrounding area.

  There is no reason for the proposed crossover in not achieving PO compliance based off the specified
  criteria.

  Development complies with PO8 of the Low Density Housing Code.




CL6006/1-01/07/2018                                                                                6 of 10