2 David Low Way - Attachment 3 - Civil Engineering Assessment - Sheehy 10-8-17

Castaways — 2 David Low Way, Castaways Beach
Civil Works, including drainage, earthworks, erosion and sediment
control, waste management and services

 

Column 1 Specific
Outcomes

column 2 Probable
solutions (if code
assessable)

 

Change in gradients

O2 Vehicles can travel the
length of the driveway
without the underside of
the vehicle contacting the
driveway surface; AND O03
Driveways do not result in a
change in the level of the
footpath.

$2.1 The long section of the
driveway incorporates
appropriate vehicle curves
for a standard vehicle; AND
$3.1 Where a footpath
exists, the driveway meets
the road reserve at the level
of the existing footpath.

The longitudinal section of
the proposed driveway
includes for appropriate
alignment for a standard
service vehicle.

The driveway will meet the
road reserve at the level of
the footpath

 

Driveway width

04 Driveways are of
sufficient width to permit
safe access to vehicle
accommodation or vehicle
standing areas.

S4.1 Driveways have a
minimum width of 3m and a
maximum width of—

a) 6m within the property;
and b) 4.5m outside of the
property.

The proposed driveway has
a width of 3.1m within the
development for the two
driveway legs and a width of
5.5m for the access to David
Low Way (refer Brisbane
City Council Standard
Drawing BSD-2021 as no
Noosa Council standard
applies for multiple
dwellings)

 

Driveway loadings

OS Driveways are to be able
to withstand loadings from
vehicles.

 

 

$5.1 For lots in the
Detached Housing, Semi
Attached Housing, Attached
Housing or Village Mix
Zone-the driveway is
constructed of concrete,
asphalt, clay pavers or
concrete pavers;

AND

$5.2 For concrete
driveways, the following
applies—

a) N20 strength in
accordance with AS1379 &
AS3600;

b) reinforcement fabric in
accordance with AS1304
with 50mm cover (F62min);
c) expansion joints 10mm
thick with full depth closed
cell cross-linked
polyethylene foam (85 - 150

 

The driveway will be
constructed of concrete,
asphalt, clay pavers or
concrete pavers. This will be
confirmed during detail
design and comply with the
material requirements
stated in the Code.

 

5|Page

2/06/2017