Original source · versioned page text
SBSMR 20004 Revision D - Response to RFI
6. WATER QUALITY
6.1 STORMWATER QUALITY OBJECTIVES
Noosa Council recommends using design standards as described in State Planning Policy 2017
Appendix 2.
The specific stormwater quality management objectives that will apply to the operational phase
of the proposed development have been taken, as advised in the above documents, from SEQ
Regional Plan 2009-2031 Water Sensitive Urban Design: Design Objectives for Urban
Stormwater Management (DERM). These load reduction targets will be used when comparing
the mitigated and unmitigated post-development site.
WSUD for SEQ - Water Quality Objectives
Indicator Required Reduction in Average
Annual Pollutant Load
Suspended Solids (TSS) 80 %
Total Phosphorus (TP) 60 %
Total Nitrogen (TN) 45 %
Gross Pollutants 90 %
These load reduction values are based on the developed unmitigated scenario compared to the
developed scenario with stormwater quality improvement devices.
NMA-SBSWMR-20004 Noosa Youngcare 10
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.