Council archive · source document
Decision Notice - Approved by Delegation of Authority - MCU25 0054 & OPW25 0077 (As Published) · MCU25/0054
15 DA05 Southern fence elevation 1/8/2025
Prepared by Skale Building Design
16 DA05 Eastern fence elevation 1/8/2025
Prepared by Skale Building Design
17 DA05 Street fence elevation 1/8/2025
Prepared by Skale Building Design
18 DA05 Section A 1/8/2025
Prepared by Skale Building Design
Building Height
4. The maximum height of the development must not exceed 12 metres above the ground level
including where excavation is undertaken the exposed portion of the external façade of the
building.
5. The ground level must be reinstated around the basement level to ensure no part of which is
more than 1 metre above ground level, apart from the driveway entrance.
6. Certification must be submitted to Council from a Registered Cadastral Surveyor (Qld) which
certifies that the building does not exceed the maximum height requirement of this Decision
Notice.
Performance Bond
7. Security in the form of a cash bond or trading bank guarantee to the sum of $25,000 must
be submitted to Council, to secure performance of all conditions of this approval, prior to pre-
start meeting. The cash bond or trading bank guarantee will be returned on performance of
the conditions of approval less any costs incurred by Council in respect of enforcing
performance of this permit. Council reserves the right to call upon the bond or guaranteed
sum to effect compliance with conditions.
Water & Sewer Connections
8. An underground connection to reticulated water and sewerage must be provided to the
premises in accordance with the standards and requirements of Northern SEQ Distributor–
Retailer Authority (Unitywater).
9. A Certificate of Completion from the Northern SEQ Distributor–Retailer Authority (Unitywater)
must be submitted to Council that certifies an underground connection to reticulated water
and sewerage has been provided to the premises.
Building Appearance
10. External design features, materials and finishes must be as shown on the Approved Plans,
with no inclusions or alterations made without approval in writing by Council.
11. External finishes of the building must be a mix of lightweight and textured external finishes,
with masonry areas incorporating a variety of textured finishes to break up the surface.
12. All deck and balcony areas must not be enclosed with shutters, louvres, glass panelling or
the like thus remaining as open structures, except where required to satisfy any privacy
condition of this Decision Notice.
13. All balustrades to decks and balcony areas must be open or transparent except where
conditioned to provide protection of privacy.
14. External colours and finishes must be of an understated colour scheme and low-reflective
roofing and cladding materials.
Page 3 of 21
Document Set ID: 24087855
Version: 5, Version Date: 03/09/2025
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Decision Notice - Approved by Delegation of Authority - MCU25 0054 & OPW25 0077 (As Published).pdfRelated documentApplication case desk ↗
Decision Notice - Approved by Delegation of Authority - MCU25 0054 & OPW25 0077 (As Published)Related documentApplication case desk ↗
About this file
- File size
- 211 KB (small file)
- File type
No other editions are linked here.