Skip to the record
The definitive source for everything Noosa Council.

Council archive · source document

JFP SBSMP Revision C · OPW24/0103

of 39

Text shows just the words. Original shows the document exactly as it was published.

Check the original when the exact wording matters.

3.4      PRE-DEVELOPMENT SITE XP-STORM
A peak flow analysis has been undertaken using the XP-STORM version 2024.2 for sizing the detention
tank. The pre-development site was modelled using a single node and peak flows verified against the
Rational Method Calculation.

3.4.1 CATCHMENT DATA

Table 3 presents the catchment modelled in XP-STORM. Refer to Drawings No. M3024E_DA1_SK01 in
Appendix D for the catchment plan.

                                   Table 3 – Pre-Development Catchment Data
                                                                     Fraction             Vectored Slope
                  Catchment                Area (ha)
                                                                    Impervious                 (%)
                     E1                     0.0486                     57%                     10%

3.4.2 RAINFALL DATA

The site specific 2016 rainfall intensities obtained from BOM and a 20% increase in rainfall intensity has
been adopted to represent the year 2100. The rainfall intensities have been coupled Australian Rainfall
& Runoff (AR&R) 1987 temporal patterns for zone 3 have been used to generate peak flow hydrographs
in XP-STORM.

3.4.3 HYDROLOGICAL LOSSES

The following initial loss, continuous loss and Manning’s n values have been adopted for the hydrological
modelling. They are within the ranges recommended in the AR&R (1987) for Southeast Queensland.

                                            Table 4 – Hydrological Losses
                                                                             Continuing Loss
         AEP                   Area Type         Initial Loss (mm)                                   Manning’s n
                                                                                (mm/hr)
                          Impervious Area                    0                     0                       0.014
      63% to 1%
                           Pervious Area                   15                      2                       0.07

3.4.4 BX FACTOR

A Bx factor of 1.8 has been used across all AEPs modelled.

3.4.5 EXISTING PEAK DISCHARGE

The XP-STORM hydrology was run for the standard AEPs from a 63% AEP to a 1% AEP and 15 to 180-
minute standard durations. Table 5 presents pre-development site peak flows using the current rainfall
intensities.

                       Table 5 – Pre-Development Peak Flows (Current Rainfall Intensities)
                                                 Pre-Development Peak Flows (m³/s)
                                                     Current Rainfall Intensities
                     63% AEP       39% AEP        20% AEP    10% AEP        5% AEP             2% AEP         1% AEP
  Rational Calc        0.010         0.013           0.018          0.022         0.026         0.033         0.037
    XP-STORM           0.012         0.017           0.021          0.027         0.032         0.034         0.038
      Variance        +0.002        +0.004           +0.003         +0.005       +0.006        +0.001         +0.001


SITE BASED STORMWATER MANAGEMENT PLAN – Revision C                                  36 & 38 DUKE STREET, SUNSHINE BEACH
                                                       P a g e |8

Used in these records

About this file

File size
8.5 MB (large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

JFP SBSMP Revision C.pdf · 8.5 MB (large file)

The download may take up to a minute.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.