Council archive · source document
SUPERSEDED - Minor Change Existing Approval 132002 220460 4 [As Published] · 132002.220460.4
Carparking
18. Carparking shall be provided on site, within the proposed basement carpark, generally as
shown on drawing number DA-02B, dated 25/07/04, as prepared by Scott Mayes Design
Services, project number 862 except as modified herein.
19. All carparking shall comply with the provisions of AS 2890.1-1993 for user class 3.
20. In accordance with AS2890.1-1993, section 5.3 - Headroom, the minimum head clearance
(headroom) at any point within the basement carpark shall be 2.2 metres.
21. All carparking shall be kept, maintained, and line-marked in a condition fit for use.
Roadworks Contributions
22. A roadworks contribution of $963.33 towards the Coastal Major Road Network shall be paid
to the Council prior to obtaining a Development Permit for Operational Works. This amount
will be subject to variations in the Price Index, All Groups Brisbane from June 2002 until the
date of payment.
Beach Access Contributions
23. A contribution toward the provision of beach access shall be paid in accordance with
Council’s Planning Scheme Policy PSP 4 on Beach Access Contributions prior to the issue
of a Development Permit for Operational Works. The amount of the contribution shall be
calculated at the rate current at the date of payment. An estimate only of the contribution
rate as of September 2002 was $65 per accommodation unit.
Earthworks
24. Prior to undertaking any excavation, the person acting on this permit shall contact all public
utility service providers to ascertain the location of their underground services.
25. The transportation of all materials to and from the site shall be undertaken in a manner such
that no particle matter escapes onto a public road. All vehicles carrying materials either to
or from the site shall be covered to prevent materials including dust being windblown from
the vehicle.
26. Any earthworks required on site shall be carried out in accordance with Section 3.8 of
Council's "Engineering Design Standards" manual and so as not to cause the ponding of
water on any adjoining lands or the blockage of, or interference with, any natural
watercourses.
Retaining Walls
27. A Registered Professional Engineer Queensland shall design any retaining walls greater
than one (1) metre in height and submit detailed plans for Council approval prior to obtaining
a Development Permit for Operational Works.
Retaining wall designs shall also incorporate a 1 metre high fence or similar if there is a risk
of people falling from the high side of the wall.
Frontage Works
28. Footpath improvements such as topsoiling, grassing, and tree planting will be required to the
street frontage in accordance with Planning Scheme Policy PSP1 Landscaping Guidelines.
Grass shall be couch, free of weeds.
29. A new 2 metre wide concrete path shall be constructed along the frontage of the site where
there is not already a concrete path or where the existing path is damaged.
30. The new path shall be designed and constructed to levels that minimise the risk of
pedestrians from tripping or slipping and the path shall join neatly and smoothly with the
existing paths. Care shall be taken to protect any significant vegetation or any underground
services.
Page 4 of 9
Document Set ID: 20570273
Version: 4, Version Date: 01/05/2018
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
SUPERSEDED - Minor Change Existing Approval 132002 220460 4 [As Published].pdfRelated documentApplication case desk ↗
About this file
- File size
- 205 KB (small file)
- File type
No other editions are linked here.