B Current Decision Notice · 132007.2398

                                                                                        132007.2398.01

     103.2 10m vehicle length (not 9m as proposed) travel path and turning access.
     103.3 Bulk bins (1.1 cu.m.) may also be considered provided HRV 12.5m length access
           is available.
104. Plans are to be submitted for approval by Council’s Environmental Health Section of the
     HRV 12.5m and 10m length waste vehicle travel paths and turning access. Plans must
     clearly show routes and ensure that vehicle overhangs when turning are clear of all
     obstructions e.g. posts, poles, fences, landscaping, etc.
105. All road traffic islands are to be trafficable for the waste vehicles.
106. All bins are to be placed in the correct position for collection at the roadside without the
     need of the driver leaving the waste collection vehicle.
107. Council’s waste collection service during Stage 1 will not commence until the required
     road access and waste storage facilities (including temporary ones), are in place.
108. A Waste Management Plan (construction and demolition) shall be submitted prior to
     demolition, removal or relocation of any building other than a shed. Waste Management
     Plan (construction and demolition) is also required for construction of 15 or more
     dwelling units or for any business use of greater than 500m².
     Waste Management Plans (construction and demolition) are required to be submitted in
     accordance with Planning Scheme Policy 11, Waste Management Plans see table
     below. Waste storage areas are to provide for adequate separation of all reusable,
     recyclable and waste materials. These shall be located so that they are convenient and
     safe to use. The Plan shall contain the following information:
           The site area for the storage and separation of waste is to be shown on the plan
            drawings accompanying the application.
           A waste management table as indicated below is to be completed showing how
            waste material is to be segregated - recycled – reused or disposed.
    MATERIALS ON-SITE                       DESTINATION
                                            Re-use and Recycling                      Disposal
    Expected waste              Estimated   On-site            Off-site               *specify
    materials                   volume      *specify proposed *specify                contractor    and
                                (m³)        re-use or on-site contractor      and     landfill site or
                                            recycling          recycling outlet       other     disposal
                                            methods                                   site
    Excavation material
    Green waste
    Bricks
    Concrete
    Timber-please specify
    Plasterboard
    Metals - please specify
    Asbestos
    Other - please specify
      Note * If a demolition contractor is undertaking works, then the Waste Management table is to be
      completed by the demolition contractor.

      The purpose of the Waste Management Plan is to facilitate the segregation of waste for the
      effective reuse and recycling of such materials. Additionally Council rewards those who
      segregate waste by significantly reducing disposal fees at the landfill some items are free. Higher
      gate fees are charged for loads of mixed waste.




                                                                                       Page 15 of 21