2014-05-29 Ordinary Meeting Agenda

ORDINARY MEETING AGENDA                                                             29 MAY 2014


    Waste Management Plan
    18.19.      A Waste Management Plan (Operational) in accordance with Planning
         Scheme Policy No. 9 “Waste Management Multi-Dwellings and Commercial and
         Industrial Premises”, for the day-to-day operation of the development is to be
         submitted and approved by council prior to the issue of a Development Permit for
         Operational Works. The Plan should include the following information as a minimum:
             The types of waste that will be generated from the activities approved within the
              development.
             Estimated volumes or tonnage of both recyclables and waste generated.
             Methods to be used for dealing with any green waste.
             Initiatives to minimize waste either by waste prevention, reduction, re-use or
              recycling.
             Description of procedures for getting all waste to the bins; the storage of bins and
              the collection of bins by the contractor.
             A description of the design details of waste storage and recycling areas including
              size, location, elevation, enclosure/s, floor plan and methods of bin washing that
              prevent contamination of storm water and an appropriately sized bin wash area
              drained to sewer.
             A description of types and volume of waste storage containers to be used.
             The waste and recycling storage area should include the provision of correctly
              sized containers for all waste and recycling materials including putrescible matter,
              non-recycling waste, paper/ cardboard, glass, aluminium/steel cans, waste oil,
              styrofoam boxes, etc., and bin washing facilities connected to sewer.
             A detailed description of the waste vehicle access to collect waste including
              vehicle turnarounds consistent with vehicle access requirements that allow
              vehicles to enter and leave the site in a forward direction. It should be noted that:
                 o   Waste vehicles are front loading for steel bins 1.5 to 3m3 bins
                 o   Waste vehicles are rear loading for plastic low noise bins 1.1m3 bins
                 o   Waste vehicles are side loading for 240 litre wheelie bins
                 o   The advisory notes contain specifications for Refuse Vehicle Access
                     Requirements for design purposes
      Outdoor Lighting
    19.20.     Any outdoor lighting with the potential to affect surrounding residential
         premises shall be designed, installed, operated and maintained in accordance with
         AS4282 "The Control of the Obtrusive effects of Outdoor Lighting".
    20.21.      During operating hours, all parking areas, pedestrian areas and
         entrances/exits to all stairwells, lifts and public toilets must be well lit with vandal
         resistant lighting and with intensities to satisfy the requirements of Australian
         Standard AS1158 “Public Lighting Code”. Lighting must be designed to reduce the
         contrast between shadows and well lit areas.
      Unitywater
    21.22.     Construction activities must not impede the access of Unitywater or Fire
         Brigade personnel to vital infrastructure (eg. valves, fire hydrants and sewer access
         chambers).



                                                                                     Page 8 of 21