Skip to the record
The definitive source for everything Noosa Council.

Original source · versioned page text

14354_Council_Information response_090316

Attached to the e-mail MCU15/0108 & REC15/0028 - Information Response.

of 2

Page text shows just the words. Original shows the document exactly as it was published.

Response:
Refer attached updated proposal plans prepared by RC Studio together with vehicle turning path
diagrams prepared by SCG Consulting Engineers.

4. Provide a preliminary stormwater drainage plan for the proposed development. The plans must be
    prepared by an RPEQ and include but not be limited to:
     (a) The connection point to Council’s system
     (b) Any necessary detention and/or proposed reuse
     (c) Any necessary easements within the site.

Response:
Refer attached Stormwater Drainage plan prepared by SCG Consulting Engineers. This plan
demonstrates that the site can be connected to Councils stormwater system and provide an
appropriate stormwater outcome. A private drainage easement over part of the proposed drainage
system which provides for a shared connection point between the proposed drainage cells within each
lot to Councils existing stormwater pit will be required.


The Information and Referral Stage of IDAS has now concluded and the application is now in the
Decision Stage.

Should you have any questions with respect to the above, please do not hesitate to contact me direct.

Yours faithfully
PROJECT URBAN




Scott Sobey
DIRECTOR
Email: [email protected]
Log in to download the original file

14354_Council_Information response_090316.pdf · 132 KB (small file)

Searchable page text hides email addresses. Original files are unchanged and may show email addresses.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.