Council archive · source document
ASTP TP Report · MCU24/0001
• The proposed development seeks to establish a Dual Occupancy development to contribute to
the overall mix of housing types in the locality, which currently consists of large Dwelling Houses
and Multiple Dwelling units, and only one (1) recently approved Dual Occupancy in the
immediate area (PO1);
• The proposal is not for short-term accommodation activities but can be conditioned to comply
with the requirements for holiday letting if ever used for this purpose by future occupants
(AO6.1-AO6.4);
• No building or structure will exceed 8 metres in height (maximum 8m proposed) from natural
and finished ground level, as shown on sheets 09 and 10 of Appendix 2 (AO8.1 & AO8.2);
• Due to the dual street frontage, the proposed development presents as a single detached
Dwelling House to each street frontage. Further, the development is surrounded by large two (2)
storey Dwelling Houses and adjoins both a four (4) unit two (2) storey Multiple Dwelling and Dual
Occupancy development to the east. As such, the proposed development has a scale and bulk
that is consistent with development on surrounding sites (PO9);
• The proposed development will be constructed using lightweight materials with ample
articulation provided to the building facades throughout. Further, the development comprises
complying site coverage and building height. As such, the development does not present an
appearance of bulk to adjacent properties, roads or other areas in the vicinity of the site (PO9);
• The proposed development has a site cover of 39.62% overall (PO10);
• The proposed development achieves a complying plot ratio of 0.4:1 refer to (sheets 04a and 06a
of Appendix 2) (AO11);
• The dual street frontage enables the development to present as individual Dwellings with an
asymmetrical design to the street. Further, the design provides staggered built form components
and varied roof forms, separated by recessed balconies (AO14.1);
• The Dwelling entrances are easily recognisable from each street frontage. The entrance to Unit
A is signified by a gatehouse entry with gated access that contrasts from the front fence. Further,
the Unit B entry is visible form the street and driveway (AO14.2);
• The proposed development incorporates external design features that ensure that blank walls
will not have a length exceeding 15 metres. Further, the development provides ample
landscaping onsite to soften the development (AO14.3);
• Being located on a corner site, the development comprises doors and windows that front each
road and provides each unit with a separate vehicle access point to each road (AO14.4);
• The garage doors are not more than 6m wide (5.3m) and do not exceed 50% of the street
frontage. Further, the garages face different streets (AO15.1 – AO5.3);
• The external building facades utilise natural and textured finishes (i.e. stonewalls), lightweight
construction and open aluminum column balustrading. Rendered walls are broken up with
façade detailing or do not occupy large sections of the building elevations (AO18);
• The site is located in Noosa Heads. As such, AO19.1 does not apply;
• A rooftop terrace is not proposed (AO19.2);
• Parapet walls are not proposed (AO19.3);
• Any requirement to provide privacy treatments to particular windows/balconies can be
conditioned as part of any future development approval. It is noted that the site adjoins vacant
land to the south and a unit development to the east. The unit development to the east
comprises private open space areas that face south, not west, with the site adjoining the garage,
bin store and clothesline area of the unit development (AO20.1-AO20.5);
• With a compliant building height, site cover and setbacks to the walls and windows of the built
form provided, the development will not cause overshadowing impacts for adjoining premises
(AO20.1);
ASTP Ref: 230904 Page 8 of 15
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
ASTP TP Report.pdfRelated documentApplication case desk ↗
About this file
- File size
- 1.1 MB (small file)
- File type
No other editions are linked here.