Skip to the record
Every meeting, every word.

Council archive · source document

s290(1)(b) Amended concurrence agency response · OPW13/0583

of 19

Text shows just the words. Original shows the document exactly as it was published.

Check the original when the exact wording matters.

                                                                              SDA-0813-003915




Our reference: SDA-0813-003915
Your reference: n/a
 Attachment 1—Conditions to be imposed
 No.         Conditions                                                    Condition timing
 Development Permit for Operational Works

 Schedule 7, Table 2, Item 15 – Tidal works, or development in a coastal management
 district (Marine Safety) and Schedule 7, Table 2, Item 15A – Tidal works, or development
 in a coastal management district (Marine Pollution); Department of Transport and Main
 Roads (Maritime Safety Queensland).

    1.       (a) The construction, operation or maintenance of the
             structure must not impede the safe navigation of other        At all times
             ships or restrict safe access to or from neighbouring
             structures. AND
             (b) Any ship moored at this pontoon/jetty must not impede
             the safe navigation of other ships or restrict access to or
             from neighbouring structures

    2. The applicant must dispose of any obstructions and debris           At all times during
              encountered while undertaking the works. This work is        construction
              to be undertaken at no expense to the Department of
              Transport and Main Roads and in accordance with the
              Harbour Master’s direction.

    3.       The structure and any part thereof must not extend beyond     At all times
               that of neighbouring approved structures.
             The structure must be adequately lit and all lighting must    At all times
    4.
             be positioned so that it does not cause a risk to the safe
             navigation of other ships. Any freestanding piles must
             have retro-reflective tape fitted.
             All navigation lights, buoys, marks or signs associated
             with the development must be supplied, installed and
             maintained in accordance with the Department of
             Transport and Main Roads through Maritime Safety
             Queensland’s requirements. Please contact Maritime
             Safety on 07 3632 7500 for information regarding these
             requirements.
            No part of the approved pontoon structure or any ship
    5.       berthed at the approved pontoon structure is to encroach       At all times
             within 1.5metres of the allocated water space. The
             approved boat ramp structure is to be positioned as per the
             approved plans and use of the approved structures is to be
             as shown on the submitted Site Plan, Layout and Water
             Allocation, Drawing No. JSP-SJ-25800, Issue B prepared by
             Cardno for The Jetty Specialist on 27 March 2013.
    6.                                                                     At all times
             Any ship, berthed, moored or attached to the pontoon/
             structure must not exceed the following sizes:
                        Wet berth – length overall:8.0m; beam: 3.4m



 Department of State Development, Infrastructure and Planning                     Page1

Used in these records

About this file

File size
2.1 MB (large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

s290(1)(b) Amended concurrence agency response.pdf · 2.1 MB (large file)

The download may take up to a minute.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.