2018-11-15 Ordinary Meeting Agenda

ORDINARY MEETING AGENDA                                                     15 NOVEMBER 2018


          a.    The site area for the storage and separation of waste is to be shown on the plan
                drawings accompanying the application.
          b.    A waste management table as indicated below is to be completed showing how
                waste material is to be segregated - recycled – reused or disposed.
          c.    Table – Waste Management Table
          MATERIALS ON-SITE                                 DESTINATION
                                               Re-use and Recycling                  Disposal
     Expected waste      Estimated    On-site            Off-site               *specify contractor
     materials           volume(m³)   *specify proposed *specify contractor     and landfill site or
                                      re-use or on-site  and recycling outlet   other disposal site
                                      recycling methods
     Excavation
     material
     Green waste
     Bricks
     Concrete
     Timber-please
     specify
     Plasterboard
     Metals - please
     specify
     Asbestos
     Other - please
     specify
    Note * If a demolition contractor is undertaking works, then the Waste Management table is
    to be completed by the demolition contractor.
    WASTE
    42.   The developer must provide waste storage and disposal facilities in accordance with
          Planning Scheme Policy No. 9 "Waste Management Multi-Dwellings and Commercial
          and Industrial Premises". The facilities must include an external impervious area
          correctly sized for all refuse and recycling containers and suitably screened from public
          places and neighbouring properties. A bin wash area is required with a cold-water tap,
          hose and drain outlet connected to sewer, via a bucket trap. The drain outlet must be
          designed to prevent storm water entry to the sewerage system. This can be achieved
          with a nib wall 50mm high and up to 700mm x 700mm wide (max 0.5m2) , or
          alternatively the waste area can be roofed, or any other design approved by Council.
    43.   Refuse containers must be provided in accordance with the requirements of the
          Environmental Protection (Interim Waste) Regulation 1996 and (Waste Management)
          Regulation 2000, for the storage and collection of refuse.
    44.   Bins must be provided throughout the site to reduce littering. All bins provided must be
          for refuse and recycling and be decanted into the bulk bins by the site operators.
    ENGINEERING
          Site Specific Conditions
    45.   The proposed flood barrier must be of a design that is activated by the rising flood
          levels and the associated hydraulic differential to raise and lower the barrier. The
          barrier must not require a power supply or human intervention. The barrier must be
          maintained by the property owner in accordance with the manufacturer’s specifications.
          The works must be undertaken in accordance with an Operational Works approval and
          must include in particular:
          a.    Certification from a Registered Professional Engineer of Queensland (RPEQ)
                that states that the design of the barrier is suitable for its intended use.

                                                                                     Page 42 of 47