Minor Change Existing Approval - 152000.200053.3 (As Published)

               36.    All designs for engineering works involving the construction of pavements, kerb and channel,
                      vehicular access, footpaths, turnouts, stormwater drainage, water supply or sewerage
                      reticulation shall be prepared in accordance with the requirements of Council's Engineering
                      Design Standards, shall reference where applicable to Council’s Standard Drawings and
                      shall incorporate best engineering practice.
               37.    Prior to Council endorsing the Plan of Survey, a certificate from a registered Professional
                      Civil Engineer shall be submitted to Council for each Development Permit for Operational
                      Works issued pursuant to this permit. The engineer shall certify that he has supervised those
                      works and that they have been completed in a workman like manner in accordance with good
                      engineering practice and in accordance with that permit.
               38.    As Constructed drawings certified by a registered surveyor showing the extent and finished
                      levels of the filling works are to be submitted for Council's records.
                      These drawings must fully detail levels for all engineering works including water supply and
                      sewer reticulation, drainage structures, building floor levels, finished ground levels, and
                      pavement surface levels. Drawings shall be on transparencies, a hard copy highlighting any
                      changes from design and in electronic format on an IBM PC compatible floppy disk in a
                      format capable of integration with Council’s computer system.
                      Approval of works shall not be granted until as constructed drawings have been supplied.
               39.    The site shall be landscaped in accordance with the approved Landscape Design Report and
                      Council’s Policy PSP1 Landscaping Guidelines, and properly prepared landscaping plans by
                      a qualified landscape architect or qualified horticulturist are to be submitted in conjunction
                      with an application for any Development Permit for Operational Works incorporating
                      landscaping. Where other permits for Operational Works for roads, drainage or access are
                      required, the landscaping layout shall be based on approved drawings for those operational
                      works. The landscaping plans are to address :-
                      39.1. Street tree planting.
                      39.2. Parkland areas.
                      39.3. Removal of undesirable species.
                      39.4. Revegetation of buffer areas to provide effective screening.
                      39.5. Provision of a water service connection to each landscaped area on common property.
                      39.6. Reinstatement of Melaleuca forest (with associated species including Lomandra) within
                            the esplanade area and the two areas marked “Community Park” on plan D-SP-01 A
                            dated 18.1.2000. This planting shall extend to a minimum distance of 30 metres inland
                            of the Lake’s edge in the vicinity of the two Community Parks.
                      A Development Permit for Operational Works covering landscaping must be obtained prior
                      to the commencement of any landscaping works.
               40.    Landscaping plans must include: -
                      40.1. Contour lines and levels;
                      40.2. Landscape treatments, such as fence, retaining walls, paving, lawn, planting etc;
                      40.3. Planting schedule detailing location and botanical names of all trees, shrubs, ground
                            covers, etc;
                      40.4. Site, street and other close proximity trees shall be accurately located on the
                            site/landscape plan and shall be identified as being either retained, trimmed,
                            transplanted or removed; and
                      40.5. Areas of cut and fill.
                      40.6. Details of water service connections to landscaped areas.
                      Where other permits for Operational Works for roads, drainage or access are required, the
                      landscaping layout shall be based on approved drawings for those operational works.


                                                                                                      Page 7 of 12
Document Set ID: 25217809
Version: 7, Version Date: 07/10/2026