Council archive · source document
Part 9 of 37 Appendix 7 - Stormwater Management MCU12/0208
Very large file (52.0 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.
Noosa on Weyba
Stormwater Management Plan
~,.., Cardno@
> Coarse sediment forebays on the inlet point.
> Batters should be densely vegetated to deter pedestrian/vehicle access. The batter slope should be at
least 1 in 2.
> Inorganic mulch laid over the filter media surface improves moisture retention. The mulch used should
not float during rainfall.
> The overflow pit invert will be 150 mm above the base to provide for extended detention. The total depth
of the bio-retention garden will be around 250 mm to prevent ponding within the road.
> Litter baskets should be installed on the overflow pits.
> Clean out points should be provided for all underdrainage.
> A flat pedestrian refuge area of around 300mm width should be provided along the boundary with the
road.
A typical bio-retention garden cross-section is shown below in Image 2 and an example is shown in Image 3.
WSUD garden bed type 2 -
plan Section A-A
1A 150m m thick COrlOr.t. apron,
SL62 me,h. 50 to~ co.er, 1 in +
max. Ge1:ltechn c<1I engineer to
confirm com paction requirements
AOjacent road
Type ’D’ kerb
SUr’f t or subsoil.
, and channel.
Coarse sediment
Concrete apron.
10reOOy, reler note 1.
Vegetated bioretention
Planted b<JUer, Side drClins un<ler kerb (]nd pod finished surface l-evel.
refer note 4. channel to connect to inlet refer notes 5 and 6.
p~ sepc rotely to bioretention
under-df(]in ge.
Coarse sediment
forebay, refer nate 1. Bior-ete-ntion filter medic.
Field inlet Type 1 in Refer UI.IS 160.
Under drainage, accord(]nce with UMS 337. (Removing "B oretention
refer note 2. filter me<lio. For details ~ ~er clotm and/or i m pe,mea bl.
refer IPI’lEAO Std Ilwgs liner to be,e and ,ides. Pin
WSUD-OO 1 and filter clotll to i nsitu soi I (]nd
8ioreterrtion
filter med Q, WSUD-002). lay concrete onto filter cloth,
refer note 3.
..JA
Image 2 Typical Bio-retention Garden (Water Sensitive Urban Design: Streetscape Planning and
Design Package, Brisbane City Council, 2011)
Image 3 Bio-retention Garden
6.2.4 Bio-retention Swales
Bio-retention swales are similar to bio-retention basins, except that they are long and narrow systems with
no extended detention depth. They have a shallow longitudinal grade of 2 percent or less. Field inlets are
located along the length of the swale to drain excess flows. Litter baskets should be installed on all field
inlets.
Northbrook Corporation Pty Ltd Version 2 29 November 2012
SMP_v2.docx Commercial in Confidence Page 12
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Part 9 of 37 Appendix 7 - Stormwater Management MCU12/0208Related documentApplication case desk ↗
About this file
- File size
- 52.0 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.