Council archive · source document
Part 9 of 37 Appendix 7 - Stormwater Management MCU12/0208
Very large file (52.0 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.
!5b
r=b:I
r .
tEcosol’M TECHNICAL SPECIFICATION
The RSF 100 Solid Pollutant Filter
WASTEWATER FILTRATION SYSTEMS
9.0 Cleaning an RSF 100 Solid Pollutant Filter
The RSF 100 Solid Pollutant Filter can be cleaned manually or by vacuum using street-sweeping vehicles. The steps
to be followed for each method are similar and are as follows:
Place appropriate signage, and any necessary traffic
control measures, around the work area and ensure safe
access to the unit
Open and secure the pit access cover or grate
(Manual method) -lift the intemal filtration bag holding the
captured pollutants from the pit (lifting handles are
attached to the removable liner to avoid contact with the
~~ _
.r.,__, .__
pollutants)
(Vacuum method) -
insert snorkel from suction vehicle and
remove the pollutants from the capture basket
Place the captured material into a receptacle and cover it
ready for transportation to an approved waste disposal
facility
(Manual method) prior to reinstalling the liner ensure that
-
no obstructions exist in the bottom of the gully pit. Remove
obstructions, if any, and carefully re-install the liner into the
aluminium slots
Ensure that the by-pass flap(s) is functioning properly and
make sure that the liner is firmly fitted and not obstructing
the by-pass flap(s)
Secure the pit access cover or grate and remove all
equipment and signage
Ensure any affected areas are restored to their original
condition
Street-cleaning equipment can be used to clean
Dispose of all captured pollutants at an approved waste
the RSF 100 quickly and efficiently with no manual
disposal facility handling of pollutants
Ecosol has a very competitive cleaning service. After each clean we provide a full report detailing the volume
and type of pollutants removed. We believe that it is in your best interests for Ecosol staff to clean and maintain
the unit, not only because we are specialists, but also because proper monitoring and maintenance enhances
the unit life significantly. Should you use another company to clean the unit, or undertake this work yourself, we
request that it be conducted according to Ecosol’s specifications. Otherwise, you may invalidate your warranty,
as damage caused by inappropriate cleaning procedures is not covered.
The cleaning frequency, and the cost, depend heavily on the surrounding environment, the unit’s proximity to a
waste facility, the number of units, their location, and the type of pollution collected. The advantages of using
Ecosol to clean and maintain your unit are:
regular inspections of your unit;
comprehensive cleaning service with the removal and disposal of all captured pollutants;
a detailed report provided on completion of each clean;
trained and experienced staff; and
remedial work completed, if required.
Your Ecosol representative can provide you with the necessary information to clean your RSF 100. More details are available in
Ecosol’s RSF 100 Operation and Maintenance Manual
Page 161
NATURAL ECOLOGICAL SOlUTIONS
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Part 9 of 37 Appendix 7 - Stormwater Management MCU12/0208Related documentApplication case desk ↗
About this file
- File size
- 52.0 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.