MCU14/0056 Response to SARA - Consulting Report

EN 858-1:2002 (E)

Table 5 — Type tests

 

 

 

 

 

 

Aspect to be tested Test method/ evaluation of] Nature and number of samples, Requirements
conformity according to test specimens and according to
measurements :
Class of separator 8.3.3 Every prototype separator 4
Nominal size 8.3.3 Every prototype separator 5
General 6.1 Every prototype separator 6.1
system
Concrete 8.1.1 According to 6.2.2 6.2.2
Metallic materials Analysis or supplier's According io the standards Manufacturers

certificate

referred to in 6.2.3

material specification
and 6.2.3

 

 

 

Plastics materials 8.1.2 According to the standard 6.2.4
referred to in 6.2.4

Sealing materials Standards referred to in |According to the standard 6.2.5
6.2.5en referred to in 6.2.5

Coatings:

— Technical documentation Check for completeness 6.2.6.2

— Surface preparation ISO 8501-1 Prototype separator system 6.2.6.3.1

I~ Application and curing Check for compliance with 6.2.6.3.2

technical documentation

 

— Dry film thickness

I— Adhesion

— Impact resistance

—- Scratch resistance

— Porosity

 

8.1.3.2.1

8.1.3.2.2

8.1.3.2.3

8.1.3.2.4

8.13.25

 

Concrete or steel test specimens
according to 8.1.3.2.6; five
measurements on each test
specimen

‘Three concrete or steel test
specimens according to
8.1.3.2.6; one measurement on
each test specimen

Three steel test specimens
according to 8.1.3.2.6; one
measurement on each test
specimen

Three steel test specimens
according to 8.1.3.2.6; one
measurement on each test
specimen

 

Every test specimen

6.2.6.4 a)

6.2.6.4 b)

6.2.6.4 c)

6.2.6.4 d)

 

6.2.6.4 e)

 

32

This is a licensed reproduction produced by SAi Global Ltd, an authorized distributor of British Standards