Original source · versioned page text
Minor Change Application
Attached to the e-mail RE_ MCU23_0085 - Mitton - Request for Minor Change to a Development Approval - 7 Ashdown Court_ Tinbeerwah QLD 4563.
Original PDF page 13, section 1. The text section number identifies this passage in the reader.
THIS DRAWING IS SUBJECT TO COPYRIGHT LAWS AND
9.6 ROOFS (INCLUDING PENETRATIONS, EAVES, FASCIAS AND GABLES,
MAY NOT BE COPIED WITHOUT THE WRITTEN PERMISSION
AND GUTTERS AND DOWNPIPES) OF ANNA PAROZ DESIGN AND DRAFTING ©
9.6.1 General
The following applies to all types of roofs and roofing systems:
(a) The roof/wall and roof/roof junction shall be sealed either by the use of fascia and
eaves linings or by sealing between the top of the wall and the underside of the roof
and between the rafters at the line of the wall. They shall also be protected in
accordance with Clause 3.6.
(b) Roof ventilation openings, such as gable and roof vents, shall be fitted with ember
guards made of non-combustible material or a mesh or perforated sheet conforming
with Clause 3.6 and made of corrosion-resistant steel or bronze.
(c) Roof-mounted evaporative coolers are not permitted in BAL—FZ.
Appendix H provides two generic systems for skillion, hipped and gabled roofs which are
deemed to satisfy Clause 9.6 (BAL—FZ).
G:\_UserData (CURRENT)\Documents\1. Desktop from Old Computer (CURRENT)\Desktop (Current)\ANNA'S Comp SD (Current)\2025 Current Design Jobs\Mitton Cameron, Karen Tinbeerwah 2025\Mitton 2 Shed House.rte
9.6.5 Roof penetrations
The following applies to roof penetrations:
(a) Roof penetrations, including aerials, vent pipes and supports for solar collectors or
APPENDIX H the like, shall be sealed with mineral fibre at the roof to prevent gaps. The material
APPENDIX H
used to seal the penetration shall be non-combustible.
NOTE: As a general principle, the service penetration should not significantly compromise
the performance of the element of construction it penetrates nor should it be a means to allow
9.6.3 Sheet roofs the passage
Sheet roofs shall conform with—
(a) Appendix H; (As above diagram Figure H2))
9.6.4 Veranda, carport and awning roof
(ii) Timber rafters lined on the underside with fibre-cement sheet a minimum of 6
mm in thickness, or with material conforming with AS 1530.8.2; 9.6.6 Eaves linings, fascias and gables
The following applies to eaves linings, fascias and gables:
9.6.4 Veranda, carport and awning roof - (b) Fascias and bargeboards shall conform with AS 1530.8.2.
Compliant with... (c) Eaves linings shall be—
• Cemential Cladding Sheet 6mm with H-Mould or SoffitLine, fixed over 13mm (i) a system with an FRL of –/30/30; or
Fyrchek MR (ii) a system conforming with AS 1530.8.2; or
OR (iii) a combination of Items (i) and (ii).
• James Hardie (d) Eaves penetrations shall be protected the same as for roof penetrations, as specified in
Clause 9.6.5.
(e) Eaves ventilation openings shall be fitted with ember guards in accordance with AS 1530.8.2:2018
Clause 3.6 made of corrosion-resistant steel or bronze. The methods for fire tests on building materials, components and structures, Part 8.2: Tests on
(f) Joints in eaves linings, fascias and gables may be sealed with plastic joining strips or elements of construction for buildings exposed to simulated bushfire attack — Large flaming sources
timber storm moulds. This Standard provides methods for determining the performance of external construction
elements when exposed to direct flame impingement from the fire front.
CLIENT: JOB DRAWN BY: DATE DRAWN: CHECKED BY: APPROVED FOR
NOTES: DESCRIPTION : CONSTRUCTION:
PLEASE NOTE: DETAILS SHOWN ON THESE PLANS ARE CAMERON & KAREN MITTON AP 08.04.25
INTENDED
CUSTOM DESIGN - BAL FZ
TO BE ACCURATE - HOWEVER INFORMATION WRITTEN INTO 56 OYSTER BANK ROAD, SITE ADDRESS: NOT FOR CONSTRUCTION COUNCIL AREA: SCALE:
INDIVIDUAL CONTRACTS WILL TAKE PRECEDENCE OVER PLANS BLI BLI, QLD 4560 RP186535 NOOSA SHIRE
PROGRESSION STAGE : WORKING DRAWINGS 1
* ALL DIMENSIONS ARE IN MILLIMETRES TELEPHONE : 0412 105 174
* DO NOT SCALE - USE WRITTEN DIMENSIONS 7 ASHDOWN COURT, TINBEERWAH DRAWING TITLE: JOB No: DRWG No: ISSUE:
EMAIL : [email protected]
* ALL DIMENSIONS ARE TO STRUCTURAL FRAMES ONLY QLD, 4563 A0068724 2.5 Lr
EXCLUDING FINISHED (EXISTING) SURFACES Building Design Licence no. 1269235 (Low Rise) BAL FZ CONSTRUCTION. Pg.3
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take up to a minute.