Original source · versioned page text
Minor Change Application
Attached to the e-mail RE_ MCU23_0085 - Mitton - Request for Minor Change to a Development Approval - 7 Ashdown Court_ Tinbeerwah QLD 4563.
Original PDF page 12, section 1. The text section number identifies this passage in the reader.
THIS DRAWING IS SUBJECT TO COPYRIGHT LAWS AND
MAY NOT BE COPIED WITHOUT THE WRITTEN PERMISSION
9.4.2 Joints
All joints in the external surface material of walls shall be covered, sealed,
OF ANNA PAROZ DESIGN AND DRAFTING ©
overlapped,
backed or butt-jointed
(Ref to 9.4.2.2) WALL C - James Hardie Smart Boundry Cladding 9.5.4 Doors—Side-hung external doors (including French doors, panel fold and
Compliant with... bi-fold doors)
(b) A system conforming with AS 1530.8.2 when tested from the outside. (b) conform with the following:
or (i) All door systems, including door frames and doors with glazed panels, shall—
(c) A system with an FRL of 30/30/30 or –/30/30 when tested from the (A) have an FRL of at least –/30/–; or
outside. (B) conform with AS 1530.8.2 when tested from the outside.
or (ii) Doors shall be tight-fitting to the door frame and to an abutting door, if
(d) A combination of any of Items (a), (b) or (c). applicable.
(iii) Weather strips, draught excluders or draught seals shall be installed at the base
of side-hung external doors.
(iv) Seals shall not compromise the FRL or the performance achieved in AS 1530.4.
G:\_UserData (CURRENT)\Documents\1. Desktop from Old Computer (CURRENT)\Desktop (Current)\ANNA'S Comp SD (Current)\2025 Current Design Jobs\Mitton Cameron, Karen Tinbeerwah 2025\Mitton 2 Shed House.rte
(Ref to 9.5.4) Doors—Side-hung external doors
compliant with
• Nilfire https://nilfire.com.au/ (Steel Frames)
• Xferno https://xferno.com.au/ (Aluiminium Frames)
OR
BUSHFIRE SHUTTERS
9.5.5 Doors—Sliding doors
Sliding doors shall—
(b) conform with the following:
(i) All sliding door systems, including those with glazed panels, shall—
(A) have an FRL of at least –/30/–; or
(B) conform with AS 1530.8.2 when tested from the outside.
(ii) Sliding doors shall be tight-fitting in the frames.
9.5.6 Doors—Vehicle access doors (garage doors)
The following applies to vehicle access doors:
(a) Vehicle access doors shall be non-combustible.
(b) Where the garage is attached to the building, the requirements of Clause 3.2.2(b) shall
apply.
(c) All vehicle access doors shall be protected with suitable weather strips, draught
excluders, draught seals or brushes. Door assemblies fitted with guide tracks do not
need edge gap protection.
NOTES:
1 Refer to AS/NZS 4505 for door types.
2 Gaps of door edges or building elements should be protected as per Section 3.
9.5.3 Windows and sidelights C9.5.6(c) These guide tracks do not provide a direct passage for embers into the
Window assemblies shall conform with one of the following: building.
(d) Weather strips, draught excluders, draught seals or brushes to protect edge gaps or
(b) The openable portion of the window shall be screened internally or externally with a thresholds shall be manufactured from materials having a flammability index not exceeding 5.
screen that conforms with Clause 3.6 and Clause 9.5.2; and either— (e) Vehicle access doors shall not include ventilation slots.
(i) the window system shall have an FRL of at least –/30/–; or
(ii) the window system shall conform with AS 1530.8.2 when tested from the outside. (Ref to 9.5.6) Doors—Vehicle access doors (garage doors)
compliant with
(Ref to 9.5.3) Windows & Sidelights
compliant with • Centurian Doors https://www.cgdoors.com.au/wp-
content/uploads/2017/09/Centurion-CinderFire-Seal-
9.4.3 Vents and weepholes • Nilfire https://nilfire.com.au/ (Steel Frames) System.pdf
Except for exclusions provided in Clause 3.6, vents and weepholes in external walls shall • Xferno https://xferno.com.au/ (Aluiminium Frames) (Or similar product compliant with AS3959 & AS1530 STANDARDS)
be screened with a mesh made of corrosion-resistant steel or bronze. • Paarhammer https://www.paarhammer.com.au/
OR AS 1530.8.2:2018
9.5.2 Screens for windows and doors The methods for fire tests on building materials, components and structures, Part 8.2: Tests on
Where fitted, screens for windows and doors shall have a mesh or perforated sheet made of elements of construction for buildings exposed to simulated bushfire attack — Large flaming sources
BUSHFIRE SHUTTERS
corrosion-resistant steel or bronze. This Standard provides methods for determining the performance of external construction
The frame supporting the mesh or perforated sheet shall be metal. elements when exposed to direct flame impingement from the fire front.
Screen assemblies shall be attached using metal fixings.
CLIENT: JOB DRAWN BY: DATE DRAWN: CHECKED BY: APPROVED FOR
NOTES: DESCRIPTION : CONSTRUCTION:
PLEASE NOTE: DETAILS SHOWN ON THESE PLANS ARE CAMERON & KAREN MITTON AP 08.04.25
INTENDED
CUSTOM DESIGN - BAL FZ
TO BE ACCURATE - HOWEVER INFORMATION WRITTEN INTO 56 OYSTER BANK ROAD, SITE ADDRESS: NOT FOR CONSTRUCTION COUNCIL AREA: SCALE:
INDIVIDUAL CONTRACTS WILL TAKE PRECEDENCE OVER PLANS BLI BLI, QLD 4560 RP186535 NOOSA SHIRE
PROGRESSION STAGE : WORKING DRAWINGS 1
* ALL DIMENSIONS ARE IN MILLIMETRES TELEPHONE : 0412 105 174
* DO NOT SCALE - USE WRITTEN DIMENSIONS 7 ASHDOWN COURT, TINBEERWAH DRAWING TITLE: JOB No: DRWG No: ISSUE:
EMAIL : [email protected]
* ALL DIMENSIONS ARE TO STRUCTURAL FRAMES ONLY QLD, 4563 A0068724 2.4 Lr
EXCLUDING FINISHED (EXISTING) SURFACES Building Design Licence no. 1269235 (Low Rise) BAL FZ CONSTRUCTION. Pg. 2
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take up to a minute.