Recommendation - Noosa Iconic Panel - 010.2009.00000982.001 [As Published] · 142009.982

       09/161-2          -      “O” Boats Proposed Extensions        John Norden &      October 2009
                                No.222 Gympie Terrace                Associates
                                Noosaville

2.    All structures associated with the use (jetty and pontoons) must be constructed wholly within
      the lease area as shown on CP908649.
3.    The jetty and pontoons shall be licensed with the Council upon completion of the structural
      work and shall be licensed annually thereafter.
4.    To ensure the safety of persons accessing the approved works and to prevent environmental
      harm, a safety audit of the on-site fuel storage tanks, bowsers and associate pipework, valves,
      vents and systems shall be conducted by a suitably qualified professional and submitted to
      Council for approval. The audit shall demonstrate that the fuel systems are in a safe and
      serviceable condition or, where necessary, identify repair and rectification requirements to
      meet the relevant Australian Standards and industry best practice environmental
      management. Any repair works must be completed, with certification submitted by the auditor
      to Council, prior to the use of the new works (pontoon/jetty extensions).
5.    Structures shall designed and constructed such that they are free standing within the
      waterway and are not connected to or behind the revetment wall or rock wall.
6.    No posts or vertical supports of the proposed structures are to extend vertically above the height
      of the existing piles.
7.    No boatlifting devices are to be attached or moored at the jetty structure for the purpose of
      elevating a vessel above the water without Council approval.
8.    The jetty shall be constructed in a manner to render the underside area vermin proof.
9.    The connection point for any electrical reticulation system extending beyond the revetment
      wall must be located above the Q100 flood level.
10.   Lighting associated with the use shall be designed, installed, operated, and maintained in
      accordance with Section 3 of AS4282 Control of the Obtrusive Effects of Outdoor Lighting.
11.   Boat repair activities will not be permitted on site.
12.   Wastewater and sullage shall only be disposed of at approved pumpout facilities.
13.   The mooring facility shall not be utilised for live-aboard purposes.
14.   Any construction and post construction activity is not to impact on the condition of the
      waterway, and is to be conducted so as not to breach the Environmental Protection Act (EPA)
      1994 and the Environmental Protection (Water) Policy 1997.
15.   The approval or conditions do not constitute a ruling on structural safety and the applicant
      must make their own arrangements to ensure adequacy of design and work. The granting of
      the approval does not warrant that the plans and specifications have been checked in detail,
      nor does it absolve the owner of the land from complying with all the conditions of this
      approval and/or relevant Council By-Laws and Policies and/or relevant statutes and/or
      statutory regulations in the execution and/or performance of the works. The Council does not
      accept any responsibility for the accuracy of such plans and specifications as approved.
16.   Certification by a Registered Professional Engineer of Queensland shall be submitted to
      Council prior to the return of any bond monies held by Council. The certification shall state that
      the works have been constructed in accordance with best practice methods, are in accordance
      with Coastal Protection and Management Act 1995, are structurally sound and will have no
      detrimental affect on the river bed or river bank.



                                                                                      Page 2 of 13