Judgement.pdf [As Published] · 132007.1259

96.

97.

98.

The transportation of all materials to and from the site shall be undertaken in a manner
such that no particle matter escapes onto a public road. All vehicles carrying materials
either to or from the site shail be covered to prevent materials including dust being
windblown from the vehicle.

As Constructed drawings and data shall be certified by a qualified experienced Civil
Engineer for design intent, and a Licensed Surveyor shail certify the cadastre and the
location, level and type of all services and structures. All of which shall be submitted to
Council for checking and for Council's records.

The data must fully detail levels for all engineering works including but not limited to
drainage structures, finished ground levels and pavement surface levels. The data
shall be submitted in the Asset Design and As Constructed (ADAC) digital format.
(Guidelines on the use of ADAC are available at www.adac.com.au).

Approval of works shall not be granted until all As Constructed information has been
supplied and accepted by Council.

Waste Management

99.

A Waste Management Plan (Operational) in accordance with Planning Scheme Policy
No. 9 “Waste Management Multi-Dwellings and Commercial and Industrial Premises”,
must be submitted for the day-to-day operation of the development and approved by
Council’s Health Section prior to issue of development permit for operational works.

It is critical that waste areas are properly planned. A copy of Planning Scheme Policy
No. 9 explaining how to calculate waste quantities and design waste areas is available
from Council and the web. The Plan shall include the following information: -

99.1 The types of waste that will be generated from the activities approved within the
development.

99.2 Estimated volumes or tonnage of both recyclables and waste generated.
99.3 Methods to be used for dealing with garden waste.

99.4 Initiatives to minimize waste either by waste prevention, reduction, re-use or
recycling.

99.5 Description of procedures for getting all waste to the bins in the various storage
locations and the transfer to the main storage area for later collection.

99.6 A description of the design details of waste storage and recycling areas including
size, location, elevation and floor plan, methods of bin washing and system to
prevent storm water getting into sewer via the bin wash.

99.7 A description of types and volume of waste storage containers to be used.

99.8 The waste and recycling storage area shall include the provision of containers for
all waste and recycling materials including putrescible matter, non-recycling
waste, paper/ cardboard, glass, aluminium/steel cans, waste oil, styrofoam
boxes, etc, and bin washing facilities connected to sewer.

99.9 A detailed description of vehicular access to collect waste/recyclables. Access
must allow vehicles to enter and leave the site in a forward direction. Turning
circles are to be designed in accordance with AUSTROADS: design single unit
truck/bus (12.5) template. Height clearances shall allow both front and rear
loading of vehicles.

99.10 Collection details are required for approval. These are to show how collection
will not be impeded by other service/delivery vehicles, how collection will be
done when these other vehicles are occupying the loading bay area, how safety
is provided when residents vehicles and the proposed bus are using this same
area.

99.11 Refuse chutes must be provided in accordance with Council's Policy for “Refuse
Chutes and Accessories in Multi Storey Buildings”.