response to information request 3 Allambi

 7. Provide a preliminary engineering design for the vehicle crossover and
    driveway. The design must be prepared by a Registered Professional Engineer
    of Queensland and include but not be limited to:

     a. A design that is generally in accordance with Council's standard drawings
        RS-049 and RS-050
     b. A longitudinal section extending from the centreline of the road formation
        in Allambi Rise to the garage floor
     c. Sufficient detail to demonstrate that a B99 vehicle, as described in
        AS/NZS2890.1:2004, will not scrape or bottom out on the road formation or
        the driveway when entering and exiting the site

Westera Partners provides additional section plans through the driveway demonstrating
driveway grades no greater than 25% to account for the drop in elevation of nearly 2m
from the Allambi Rise road alignment to the garage ~15.5m away.




Figure.7 Vehicle Driveway details and Council standard drawing




                                                                         Page 7 of 9