Council archive · source document
22441 DA - Response to Information Request [As Published] · 132001.210331.2
Kidd + Co- 10 Park Road Noosa Heads QLD 4567 12 ¢ All trees being retained on site should be appropriately marked by the site arborist. e Tree Protection Fencing (where used or designated) is to consist of 1800mm high chain mesh fencing or similar appropriate fencing approved by the site arborist. TPF is to be anchored by star pickets to prevent movement during construction. e The construction workers or subcontractors working on the site are to be * informed of tree protection importance by the builder. © The site arborist and the builder should agree upon and designate storage, dumping and wash areas that will not impact on the trees during construction. e Any pruning works required (such as deadwood removal or clearance ‘ pruning), including root pruning, shall be carried out by the tree contractor to ' Australian Standards AS 4373 -1996 ‘Pruning of Amenity Trees’. e The site arborist shall conduct any initial hazard assessment of the retained trees to identify any trees that present a Workplace Health and Safety risk to any workers on the site. Where possible, arboricultural hazard mitigation procedures should be undertaken by the tree contractor when and where appropriate eg. Deadwood removal., At no point should a tree be removed unless approved by Noosa Shire Council (site arborist to document reasons for removal and contact council to organise a site meeting). During Construction e The builder is to install jute matting (or appropriate measures as agreed upon with the site arborist) where foot or machinery access is required onto the site to construct the garage and driveway. These measures must minimise soil erosion and root damage to all trées in close proximity to the construction works. e The site arborist shall be present to supervise any excavation, trenching or tunnelling located on the site that may affect any tree roots, and shall keep a record of works to present to Council after completion of construction. : e Where possible the first 500mm of any: excavation should be dug by hand to identify any significant tree roots (25mm or greater in diameter). Grabbing and tearing of tree roots by machinery is prohibited, and the contractor responsible will become liable for any arboricultural work to rectify the damage. , ¢ No roots greater than 25mm shall be cut during construction without consent of the site arborist. All tree roots cut are to be identified and documented by the site arborist. Leaf and Limb Horticultural Consultancy ©“ Prepared by Samuel Cowie 7" of May 2007
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
22441 DA - Response to Information Request [As Published]Related documentApplication case desk ↗
About this file
- File size
- 4.3 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.