Original source · versioned page text
Development Assessment Report
Original PDF page 35, section 1. The text section number identifies this passage in the reader.
building; maximum of 6 metres wide; and
(b) do not dominate the street or (b) do not encroach into building
building design; setback areas.
(c) are screened through
landscaping; and Editor's note— refer to Figure 6.9.2
(d) do not present as a storey to the
street.
Front fences and walls
PO17 AO17.1 Not Applicable
Front fences and walls are designed Front fences or walls are set back an No front fencing proposed
and sited to: average of 1 metre and are
(a) contribute to the attractiveness articulated to provide visual interest
of the streetscape; by stepping the design at a
(b) be compatible with the existing maximum of 5 metre intervals.
streetscape character;
(c) avoid interference with AO17.2 Not Applicable
movement of surface Where located on the boundary: No front fencing proposed
stormwater; (a) the solid portion of front fences
(d) allow for casual surveillance of and walls is no more than 1.2
the street; metres high; or
(e) provide planting in front of solid (b) the walls contain openings or
fences and walls; and materials that ensure it is 50%
(f) ensure plantings between the transparent and has a height not
front fence and the footpath exceeding 1.8 metres.
does not create an impediment
for pedestrians using the AO17.3 Not Applicable
footpath Solid front fences and walls may be No front fencing proposed
1.8 metres in height if the property
has frontage to an arterial road or a
distributor road.
AO17.4 Not Applicable
The area of land between the front No front fencing proposed
fence and the boundary is
landscaped to screen the fence from
the street however landscaping does
not encroach more than 500
millimeters into the road reserve or
within 1.5 metres of a sealed
footpath.
Editor's note - for examples refer to
figure AP3-4A and figure AP3-4B
Materials and finishes
PO18 AO18 Complies
Development incorporates: Buildings and structures use: The buildings provide for a mix of
(a) materials and finishes that (a) natural finishes wherever lightweight and textured external
complement the surrounding possible; materials including natural finishes
area and integrate with the (b) a mix of lightweight and and transparent balustrade to the
surrounding natural and built textured external finishes; street.
environment; and (c) masonry construction where
(b) a variety of external finishes to variation is provided in texture
provide an interesting built form and the façade uses a variety of
and avoid bulky single plane finishes to break up the surface;
finishes and
(d) open or transparent balustrades.
Editor's note—refer to Figure AP3-3B
Roof forms
PO19 AO19.1 Not Applicable
Roof forms: With the exception of Noosa Heads Site within the Coastal Communities
(a) contribute positively to the local and Coastal Communities Local Local area.
skyline; Areas, the main roof of the building
(b) complement the character of the has a roof pitch no less than 5
locality and the topography of degrees and has minimum 600
the site; millimetre eaves to at least 75% of
(c) avoid box profiles/parapets; and the perimeter of the building.
(d) do not create opportunities for
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take up to a minute.